[sdiy] Soldering problems...

[Rob B]

I would say to go ahead and start using silver based solder.. It works
pretty well, just use a slightly hotter setting on your iron..

We are all going to have to start using it soon anyway, after the UN and EPA
and WTO and all those other acronym agencies make it illegal. ;)

Rob



----- Original Message -----
From: "Christian Oncken" <Christian at dslab.com>
To: <ElmacacoX at aol.com>; <synth-diy at dropmix.xs4all.nl>
Sent: Wednesday, January 02, 2002 8:05 PM
Subject: RE: [sdiy] Soldering problems...


>
> > Harry mentioned something to me about the Tin and lead mixture not being
> > terribly soluable in humans, so as not to be a big lead risk.  I
> > think it's
> > the flux that does more damage... I'm not sure.
>
> yes, I believe so.  I dont _think_ that lead becomes a vapor very easily.
I
> could be wrong though... he said nothing of the flux, and I'm carefull not
> to breath it for TOO long a stretch.
>
> > If you are clam baking in solder fumes so much that it seeps into
> > the other
> > apartments, the fan with a duct out the window is sage advice.
>
> oh no, its nothing like that.  I built a few modules, I'm working on a
> couple theremin controllers... nothing big.  I dont even notice fumes.  No
> seeping is taking place.  He is claiming that the 'lead' is getting in the
> air and into the furnace filters.  This is why lead was found in the air
> filter, (or something like that)
>
> > P.S.  Isn;t it really fucking illegal to have lead paint in  a building?
> >
> > you could try black mail then....
>
> Yes, its illegal to not tell the tennant if there is lead paint in the
> house.  They are required to inform you, and the only other thing is that
> they make sure the paint isnt peeling off.  The apartment is well taken
care
> of, with new latex paint over all the old paint, which is acceptable.  He
> seems like an allright guy, but I think he might be blaming me because he
> dosent want to spend money, or dosent know any better.
>
> Any resources on the web that I can print out and offer as conclusive
proof
> that lead from solder dosent enter the air in sufficient quantities to
harm
> humans?
>
> Christian.
>
>
>