[sdiy] 19 rack panel strangeness

[xmurz at gmx.de]

Yust switch left/right side-parts! (If they come off)
It will work.
hopefully.

Regards,
     Hans
13.02.02 17:48:59, <tpaddock at seanet.com> wrote:

>Semi-off-topic, but anyway...
>
>I snagged a rack at work (whoo-hoo!) and started 
>putting some of my stuff in it. I have a cheap dj 
>mixer that I found has a weird size and hole layout. 
>It took me much longer to figure out what the source 
>of weirdness was than it should have. :)
>
>The panel is 11" high and has 2 screw holes on each side.
>So I use both the screws on each side.
>Now there is 5/8" space top AND bottom.
>I can (maybe) understand a space at the top for cables, 
>but not top and bottom.
>
>I can slide it down and have about a *2/3 U* space at 
>the top. Don't remember if any screws fit.
>
>I will probably do some combination of cutting, 
>drilling, and/or ignoring the problem. 
>
>Were they stupid and lazy when they built it or do I 
>just not understand something?
>
>Confused,
>Toby
>Paddock
>
>