[sdiy] 4017 success for REAL!

[TheMysticSatin]

+15v for the cmos ic's and +15v -15v for the op amp
----------
>From: "Theo" <t.hogers at home.nl>
>To: "TheMysticSatin" <elmystico at earthlink.net>
>Subject: Re: [sdiy] 4017 success for REAL!
>Date: Sat, Oct 20, 2001, 9:24 PM
>

>Thanks,
>But I forgot to ask about the supply voltage.
>Without the supply voltage the data below has little meaning.
>
>TIA again,
>Theo
>
>
>From: TheMysticSatin <elmystico at earthlink.net>
>
>> The max cv output is about 8.5 v in the 10v max configuration, the gate
>> output is about 12v...
>> thanks again, i also swapped in switch selectable capacitors to time the
>> 4017 to give it a huge range of time options
>>
>> ----------
>> >From: "Theo" <t.hogers at home.nl>
>> >To: "TheMysticSatin" <elmystico at earthlink.net>
>> >Subject: Re: [sdiy] 4017 success for REAL!
>> >Date: Sat, Oct 20, 2001, 6:19 PM
>> >
>>
>> >Congrads :)
>> >Think your the only one in on this planet who actually build this
>sequencer
>> >;)
>> >I designed it as a low part count exercise.
>> >e.g. the pots double as limiting resistors for the LEDs.
>> >Only did a quick test on breadboard, 3 or 4 step or so, never build the
>> >whole thing.
>> >
>> >Could you do me a favor?
>> >I like to know what the actual _maximum_ output levels are of the CV.
>> >TIA
>> >
>> >Theo
>> >
>> >
>> >From: TheMysticSatin <elmystico at earthlink.net>
>> >
>> >> Thanks for all the help, Theo, it's fully functional now!  and whoever
>> >> posted the trouble shooting advice about putting in one IC at a time,
>that
>> >> is the best advice, saved me probably hours of troubleshooting time.
>> >
>