[sdiy] Turkey Day DIY activities...

[Larry]

Bob

Do you have the schematics for the Aries modules?  I really wanted to get 
these when they were in production, but never had the money.  If the 
schematics were available, and maybe pictures of the front panels, then I 
might be able to breadboard the modules?  Or did they use parts that no 
longer exist?

Larry Troth

At 09:26 AM 11/20/01 -0800, Bob Gonsalves wrote:
>Similar activities over here. An old Aries chassis will be operated on. 
>The defective modules will get yanked and EFM boards put in their place. 
>Then it's time to clean up the studio for a jam session on Saturday.
>
>At 11:00 PM -0800 11/19/01, John L Marshall wrote:
>>Hi Jim,
>>
>>I have the parts to make 8 maple synthesizer cabinets. Each cabinet will
>>hold 13 modules, 5U by 26U. Lots of sanding and staining this weekend.
>>...
>>
>>.
>>
>>>      I am pretty excited about this four day weekend...
>>>
>>>      I should be getting back photo's of my latest project (under
>>>  construction).  I just stuffed the "vocal filter" (7hrs assembly time)
>>>  yesterday (still missing a few parts :-( ), a 8x2 sequencer board is
>>>  supposed to be delivered today, I am going to bread board a
>>>  multi-segment envelope generator, and wire up the front panel for all
>>>  this (well, I might not quite get all that done, but I sure hope to make
>>>  a REAL big dent in it).
>>>
>>>      Anybody else (in the states), have any big plans for Synth-DIY over
>>  > the holiday?
>
>--
>Bob Gonsalves, Research Director, Pink Noise Studios
>Art*Technology*Politics  http://www.pinknoiz.com/