[sdiy] How could I have missed a frequency counter in my own lab!

[Toby Paddock]

I don't know the specs, but it works good down to about 20Hz, 
which was important to me. It switches to 'period mode' at the 
low frequencies so it still has a good update time.

I wish I had one at home.

Later,
Toby Paddock

Scott Gravenhorst wrote:
Yesterday while fiddling with my 4069 VCO stuff, I
just noticed a button on my Fluke 8060a DMM that says
'Hz'...  !!!!  I've had this thing for YEARS.  I had
just finished measuring the freq of the VCO with my 
O'scope at 200 Hz, so I decided to try it.  It read 205.
Not bad at all.  

I no longer have the manual for this DMM, do any of you 
know what the range of accuracy is for this meter?

=========================================================  
- Government: The other religion.
- The media's credibility should always be questioned.
- Lambs who lie down with lions are lunch.

-- Scott Gravenhorst | LegoManiac / Lego Trains / RIS 1.5
-- Linux Rex         | RedWebMail by RedStarWare
-- FatMan: home1.GTE.NET/res0658s/TekLab_FatMan_WebSite/index.html