[sdiy] Yet Another Newbie Power Supply question

[Rhen, Kris]

ALL:  I bought a nice Power-One power supply (a HDCC-150W-A) for some MOTM
and Paia modules (with plenty of room to grow) and am checking it out.  Its
a +-15v supply at 3A with an additional +5v isolated supply part.  The
connections are as follows:

On the right I have

-OUT -S | +S COM -S | +S +OUT   (where the | is a division of groupings)

On the left i have

+OUT +OUT | +S -S | -OUT -OUT

On the right I get my +-15v fine relative to the COM, but on the left I get
the +5v only across the +OUT relative to the -OUT, which has me confused.  I
also don't get anything from the -OUT and +OUT on the 5v sides relative to
the COM on the +-12v sides (guess that's the isolated part right :-)?  

What I need is +-12v AND +5v relative to the same ground for the modules.
Can anyone help me with this?  Anyone used one of these supplies?  I've got
no reply from Power-One tech support, and their included documentation was
useless.  Thanks anyone
KRIS

p.s. can anyone tell me about the +S and -S terminals  - sensing?  Thanks


**********************************************************************
This email and any files attached are confidential and
intended solely for the addressee.  This email message
has also been swept for computer viruses by
MIMEsweeper  (www.mimesweeper.com)
**********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20011119/82449164/attachment.htm>