[sdiy] 1495 vs 1496

[Ian Fritz]

John --

This seems correct. However, the spec sheet for the LM1496 mentions that 
linear operation can be achieved if the switching input is kept at low 
level (25 - 50 mV maximum amplitude).

   Ian


At 04:54 PM 12/26/2001, John L Marshall wrote:
>I see the 1496 used in some 4 quadrant multiplier designs. My impression was
>that the 1496 was designed for a switched carrier input while the 1495 was
>designed for linear carrier input. Please correct my understanding.