[sdiy] Spring mounting- Reverb

[Don Tillman]

   From: KHeck73 at AOL.COM
   Date: Wed, 22 Aug 2001 22:57:09 EDT

   I have a two spring unit by Gibbs Manufacturing & Research
   Corp. (Hammond), and I suspect it probably came from an old Fender
   amp. I want to experiment with it, but it has some very delicate
   wires coming off the transducers, so I'm afraid of burning it out
   if I'm not careful. One transducer has a black wire and a green
   wire coming off it, and the other transducer has a mustard colored
   wire and a black wire attached. I don't know which end is input or
   output, or if it matters.

The input and output transducers are physically different.  See the
Accutronics web site for details.

   Any suggestions or schematics on a circuit to build around this
   thing?

See the Accutronics web site for a whole bunch of circuits with
various features.

   While searching for information, I found a company that sells the
   Accutronics reverb tanks online.

The Accutronics web site lists other distributors.  Really, check it
out. 

  -- Don

-- 
Don Tillman
Palo Alto, California, USA
don at till.com
http://www.till.com