[sdiy] Workbenches?

[KHeck73 at aol.com]

In a message dated 8/2/2001 3:09:27 PM Eastern Daylight Time, 
resfreq at hoohahrecords.com writes:


> I can't beleive that I'd be the only one who built my own workbench!  



> any years ago I took my parents' already used picnic table and nailed a 
> piece of thin plywood on top of it at the corners. I didn't put a finish on 
> it, or paint it. I could drop blobs of solder on it, or hammer, or cut, and 
> I didn't have to worry about 'messing up' my workbench. I screwed a power 
> strip on the side. After a some years of use (as a workbench and a support 
> for my ham radio station), I pried the four corners off, flipped the 
> plywood over, and bingo:  brand new workbench. It's almost 30 years old, 
> and still standing, even though it spent a number of years outside in the 
> elements. 
> -Karl.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20010802/93e251d1/attachment.htm>