June 1996 Archives by thread

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

Starting: Sat Jun 1 00:06:56 CEST 1996
Ending: Sat Jun 29 01:01:38 CEST 1996
Messages: 281

Fourier-Analysis and FM-synthesis Duane R Balvage
Touch Kbds A.S.P.
- Touch Kbds Dan Higdon
SEM-style controls Haible_Juergen#Tel2743
AW: Heated PNP array? Haible_Juergen#Tel2743
- Heated PNP array? Joachim Verghese
Grungy Digital Tonewheels -Take 2 gstopp at fibermux.com
Dividers Haible_Juergen#Tel2743
Mad Man Rambles about Noise Generators Scott Gravenhorst, Synthaholic
- Mad Man Rambles about Noise Generators Don Tillman
- Mad Man Rambles about Noise Generators Scott Gravenhorst, Synthaholic
  - Mad Man Rambles about Noise Generators Don Tillman
- Mad Man Rambles about Noise Generators Scott Gravenhorst, Synthaholic
  - Mad Man Rambles about Noise Generators Don Tillman
- Mad Man Rambles about Noise Generators johns at oei.com
- AW:Re: Mad Man Rambles about Noise Generators Haible_Juergen#Tel2743
- Mad Man Rambles about Noise Generators Scott Gravenhorst, Synthaholic
  - Mad Man Rambles about Noise Generators Don Tillman
Modifying ARP's CV/Gate inputs - Odyssey Mk2 Andy (Mattachine)
What means 'phaselocked'? (was: Re[3]: Fourier-Analysis Don Tillman
Grungy Digital Tonewheels (was Re[3]: What means Don Tillman
From Teeth to Rubber (was: What means 'phaselocked'?) Matthias
- AW: From Teeth to Rubber (was: What means 'phaselocked'?) Michael Zacherl - Bacher Systems EDV GmbH
- AW: From Teeth to Rubber (was: What means 'phaselocked'?) Haible_Juergen#Tel2743
AW(2): Re: butter and pole locations Don Tillman
FWD: Ric Miller update Matt Haines
Wanted: 6850 UART Description Rene Schmitz
Bob Stotler are you there ? Barry Bernard
PLLs to replace TOS generators Haible_Juergen#Tel2743
Midwest Analog Products Duane R Balvage
Prommer Duane R Balvage
Calling all solder-heads! Kevin Lightner
- Calling all solder-heads! Erik The ViKing
  - Calling all solder-heads! Kent Williams
Electro notes - UK Andy (Mattachine)
- Electro notes - UK julian higginson
  - Electro Notes UK Don Tillman
FET Transistors Rene Schmitz
Roland Service Notes Colin Fraser
Looking for 6/89 Elec. Musician Scott Evans
- Looking for 6/89 Elec. Musician Bob Zimmer
  - Looking for 6/89 Elec. Musician Scott Evans
DIY samplers Christopher List
- DIY samplers julian higginson
- DIY samplers Richard Martin
SEM Style knobbies Christopher List
- AW: SEM Style knobbies Christopher List
- SEM Style knobbies gstopp at fibermux.com
- AW: SEM Style knobbies gstopp at fibermux.com
- AW: SEM Style knobbies Haible_Juergen#Tel2743
- AW: SEM Style knobbies Christopher List
UNSUBSCRIBE PROBLEMS Rick Jansen
Neat Device! Bob Zimmer
ASM-1 board recieved Kevin Moon
shorter adress now Haible_Juergen#Tel2743
paint suggestions ? Barry Bernard
Ask me on modular...2 Erik Gronberg
for sale: ARP Odyssey Jones
Some more ideas on Hammond-Synthesis Daniel Oberfeld
- Some more ideas on Hammond-Synthesis Kevin Lightner
- AW: Some more ideas on Hammond-Synthesis Don Tillman
- AW: Some more ideas on Hammond-Synthesis Haible_Juergen#Tel2743
top octave chips Duane R Balvage
More shift register stuff Scott Gravenhorst, Synthaholic
The parts hunt... Kevin Lightner
ASM-1/MAT-02 Rich Holmes
- ASM-1/MAT-02 DJMaytag
- ASM-1/MAT-02 Mark Pulver
- ASM-1/MAT-02 gstopp at fibermux.com
  - ASM-1/MAT-02 Joachim Verghese
- ASM-1/MAT-02 Christopher List
opinions on HIFLI - Diode based phasing ? Rene Schmitz
ASM-1 Dan Higdon
- ASM-1 Christopher List
- ASM-1 gstopp at fibermux.com
- ASM-1 Dan Higdon
analog-switch phaser schematics online Rene Schmitz
ASM-1 pictures Kevin Lightner
LM13600 VCO On the Board and working... Scott Gravenhorst, Synthaholic
Adding feedback to a VCF Erik the ViKing
The Building Plans!!!! Erik the ViKing
Moog ladderfilter (VCF) Rick Jansen
forced clocking rbussell at mlsma.mlm.att.com
- forced clocking K.Dunnicliffe at uk22p.bull.co.uk
Clap Generator Duane R Balvage
- Clap Generator Bob.Schrum at harpercollins.com
a few 4-voice questions gstopp at fibermux.com
- a few 4-voice questions Haible_Juergen#Tel2743
Temperature compensated VCO Rene Schmitz
inexpensive pots ? Barry Bernard
- inexpensive pots ? gstopp at fibermux.com
- inexpensive pots ? A.S.P.
- inexpensive pots ? Christopher List
- inexpensive pots ? Rick Jansen
- inexpensive pots ? Haible_Juergen#Tel2743
- inexpensive pots ? Barry Bernard
- inexpensive pots ? Bob Zimmer
Digital noise generation Kevin Lightner
Modular synths/Eurocards Jeremy Brookes
- Modular synths/Eurocards Niklas Lindberg
Space Echo sound on sound Rene Schmitz
potentiometers, ASM-1 Brent L. Wood
Ric's Back! Matt Haines
my external-input amp (revised) Matt Haines
- my external-input amp (revised) Don Tillman
- my external-input amp (revised) Matt Haines
  - my external-input amp (revised) Don Tillman
  - my external-input amp (revised) MACHINE MEDIA
- AW: my external-input amp (revised) Haible_Juergen#Tel2743
- AW: Re: my external-input amp (revised) Haible_Juergen#Tel2743
Problems with MIDI-CV converter Isac Georg Jensen
- Problems with MIDI-CV converter Colin Fraser
A vco that Ive got working!!! Paul.Maddox at bew.co.uk
amateurs not welcome (was: my external-input amp) Matt Haines
- amateurs not welcome (was: my external-input amp) Tim Walters
- amateurs not welcome (was: my external-input amp) Don Tillman
- STOP! (was: amateurs not welcome) Rick Jansen
amateurs not welcome Mathias Tornqvist
- amateurs not welcome Dan Higdon
it's time, but is it the place?? DJMaytag
- it's time, but is it the place?? J.D. McEachin
Shame Paul.Maddox at bew.co.uk
5.333 Volt for Roland Filters Erik The ViKing
- 5.333 Volt for Roland Filters Joachim Verghese
- 5.333 Volt for Roland Filters Colin Fraser
- 5.333 Volt for Roland Filters Haible_Juergen#Tel2743
- 5.333 Volt for Roland Filters MACHINE MEDIA
Moog Music Revived! william.b.fox
on Pot KLEIN_B at a1.wdc.com
on Pot (dejavu) KLEIN_B at a1.wdc.com
FET pin-outs Matt Haines
- FET pin-outs Niklas Lindberg
- FET pin-outs gstopp at fibermux.com
- FET pin-outs Matt Haines
ASM-1/VCS-3 with patch memory? Tim Walters
Modular patch system Paul.Maddox at bew.co.uk
- Modular patch system Kevin Lightner
- Modular patch system Tim Walters
- Modular patch system gstopp at fibermux.com
- Modular patch system Jeremy Brookes
i thought i knew it all... (cr-8000 triggering mods) DJMaytag
Midi-CV part 2 Isac Georg Jensen
- Midi-CV part 2 Joachim Verghese
  - Midi-CV part 2 Colin Fraser
- Midi-CV part 2 Niklas Lindberg
  - Midi-CV part 2 Isac Georg Jensen
- Midi-CV part 2 Niklas Lindberg
- Midi-CV part 2 (Ian A. Vine (phone UK 0171 419 3450))
LM13700 vs. CA3080 Christopher List
- LM13700 vs. CA3080 Joachim Verghese
- AW: LM13700 vs. CA3080 Haible_Juergen#Tel2743
Used my modular in a show this weekend... Christopher List
Re(2): Modular patch system Per Mattsson
- Re(2): Modular patch system Niklas Lindberg
- Re(2): Modular patch system Barry Bernard
- Re(2): Modular patch system Tim Walters
  - Re(2): Modular patch system Tom May
- Re(2): Modular patch system Barry Bernard
strange... DJMaytag
- strange... john..
- strange... DJMaytag
ASM-1? LARRY S LEITNER
- ASM-1? Troy Sheets
New stuff on website Rene Schmitz
Just a newbie Fretnoize2 at aol.com
digital controller KLEIN_B at a1.wdc.com
No subject I. Onsager
(Re(2): Modular patch system) fEEd
- (Re(2): Modular patch system) Niklas Lindberg
v-trig to s-trig??? DJMaytag
- v-trig to s-trig??? Mark Pulver
- v-trig to s-trig??? john..
Cv/Gate for my SH2000 Martin Fay
rite of passage William M. Maciejewski
- rite of passage Christopher List
  - rite of passage (Ian A. Vine (phone UK 0171 419 3450))
  - rite of passage Mark Pulver
  - rite of passage Mark Pulver
  - rite of passage Matt Haines
    - cutting holes MACHINE MEDIA
    - cutting holes gstopp at fibermux.com
    - cutting holes Matt Haines
    - cutting holes MACHINE MEDIA
    - cutting holes A.S.P.
    - cutting holes DJMaytag
    - cutting holes A.S.P.
    - cutting holes Kevin Lightner
    - cutting holes Christopher List
    - cutting holes Rick Jansen
    - cutting holes Matt Haines
    - Heavy Metal MACHINE MEDIA
    - Heavy Metal Matt Haines
    - AW: cutting holes Christopher List
    - AW: cutting holes MACHINE MEDIA
    - cutting holes Bob Zimmer
    - AW: cutting holes Haible_Juergen#Tel2743
    - cutting holes Matt Haines
    - Drill presses (was: cutting holes) Scott Evans
    - Drill presses (was: cutting holes) Bob Zimmer
  - rite of passage Mark Pulver
- rite of passage Troy Sheets
Synthex / OSCar manuals wanted I. Onsager
My new project Haible_Juergen#Tel2743
Stretching Time... Stuart Robertson
- Stretching Time... Kevin Moon
- Stretching Time... Dan Higdon
Ring mod IC's Kevin Lightner
IC IC - 531? Kevin Lightner
- IC IC - 531? A.S.P.
New Email Address Synthaholic
Quantizer questions Christopher List
Sarcasm and FM-patches Erik The ViKing
will nothing work??? (is 606 LT trig out a v-trig???) DJMaytag
- will nothing work??? (is 606 LT trig out a v-trig???) john..
- will nothing work??? (is 606 LT trig out a v-trig???) DJMaytag
  - will nothing work??? (is 606 LT trig out a v-trig???) john..
- will nothing work??? (is 606 LT trig out a v-trig???) Matt Haines
How does din-sync work? Paul_Wilkinson at radical.ca
making panels... LARRY S LEITNER
Stupid question about synth power-supply!!! Erik The ViKing
- Stupid question about synth power-supply!!! MACHINE MEDIA
Sheppard Generator Question Rene Schmitz
12V -> 15V ? A.S.P.
will nothing work??? DJMaytag
Joystick supplier Christopher List
- Joystick supplier Haible_Juergen#Tel2743
- Joystick supplier Bob Zimmer
- Joystick supplier Bob Zimmer
Moog music online ? Niklas Lindberg
- Moog music online ? Mark Pulver
- Moog music online ? jupiter4
- Moog music online ? Mark Pulver
Paul Maddox??? john..
Cutting slots for slider pots Bob Zimmer
- Cutting slots for slider pots R.G. Keen
- Cutting slots for slider pots R.G. Keen
- Cutting slots for slider pots Eli Brandt
Moog Music Pricing Mark Pulver
ASM-1 Negative signal in, VCA Barry Bernard
Another word on front panels Bob.Schrum at harpercollins.com
Etching Holes ... Kevin Lightner
- Etching Holes ... Ian A. Vine phone UK 0171 419 3450
- Etching Holes ... Haible_Juergen#Tel2743
  - Etching Holes ... R.G. Keen
- Etching Holes ... R.G. Keen
Idea for a CV quantizer Christopher List
Things on the WWW. Erik The ViKing
- Things on the WWW. R.G. Keen
- Things on the WWW. Soundwave [Chad Gould]
- Things on the WWW. Roy Roberts
  - Things on the WWW. Rick Jansen
- Things on the WWW. Erik The ViKing
Analog Devices VCA ??? R.G. Keen
- Analog Devices VCA ??? The drink coaster formerly known as Damien Miller
- Analog Devices VCA ??? J.D. McEachin
- Analog Devices VCA ??? Christopher List
A Complex Waveform Generator Synthaholic
303sequencer michal mcelhany
- 303sequencer Christopher List
- 303sequencer MACHINE MEDIA
- 303sequencer DJMaytag
ASM VCO Paul.Maddox at bew.co.uk
- ASM VCO Paul.Maddox at bew.co.uk
Update on Midi-CV interface Isac Georg Jensen
E510 Anders Sponton
- AW: E510 Magnus Danielson
  - AW: E510 Anders Sponton
- AW: E510 Haible_Juergen#Tel2743
- AW: E510 Jeremy Brookes
CNY-17 Haible_Juergen#Tel2743
[Fwd: moooooooooooog] J P M
- [Fwd: moooooooooooog] Mark Pulver
Front panels Anders Sponton
FatMan Mixer Schematic on Music/Machines Scott Gravenhorst
Rick Jansen's Moog VCF PCB Erik The ViKing
THE ARCHIVE???? Erik The ViKing
V909 v.3 is at Hyperreal... Christopher List
Looking for Vance Gloster Aaron Goodisman
Simple Power Supply Stuff Bob Zimmer
- Simple Power Supply Stuff MACHINE MEDIA
- Simple Power Supply Stuff R.G. Keen

Last message date: Sat Jun 29 01:01:38 CEST 1996
Archived on: Tue Jun 3 23:24:05 CEST 2025

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).