June 1996 Archives by author
Starting: Sat Jun 1 00:06:56 CEST 1996
Ending: Sat Jun 29 01:01:38 CEST 1996
Messages: 281
- Modifying ARP's CV/Gate inputs - Odyssey Mk2
Andy (Mattachine)
- Electro notes - UK
Andy (Mattachine)
- Midi-CV part 2
(Ian A. Vine (phone UK 0171 419 3450))
- rite of passage
(Ian A. Vine (phone UK 0171 419 3450))
- Etching Holes ...
Ian A. Vine phone UK 0171 419 3450
- Touch Kbds
A.S.P.
- inexpensive pots ?
A.S.P.
- IC IC - 531?
A.S.P.
- 12V -> 15V ?
A.S.P.
- cutting holes
A.S.P.
- cutting holes
A.S.P.
- Fourier-Analysis and FM-synthesis
Duane R Balvage
- Midwest Analog Products
Duane R Balvage
- Prommer
Duane R Balvage
- top octave chips
Duane R Balvage
- Clap Generator
Duane R Balvage
- Bob Stotler are you there ?
Barry Bernard
- paint suggestions ?
Barry Bernard
- inexpensive pots ?
Barry Bernard
- inexpensive pots ?
Barry Bernard
- Re(2): Modular patch system
Barry Bernard
- Re(2): Modular patch system
Barry Bernard
- ASM-1 Negative signal in, VCA
Barry Bernard
- Cutting slots for slider pots
Eli Brandt
- Modular synths/Eurocards
Jeremy Brookes
- Modular patch system
Jeremy Brookes
- AW: E510
Jeremy Brookes
- ASM-1/MAT-02
DJMaytag
- it's time, but is it the place??
DJMaytag
- i thought i knew it all... (cr-8000 triggering mods)
DJMaytag
- strange...
DJMaytag
- strange...
DJMaytag
- v-trig to s-trig???
DJMaytag
- will nothing work??? (is 606 LT trig out a v-trig???)
DJMaytag
- will nothing work??? (is 606 LT trig out a v-trig???)
DJMaytag
- cutting holes
DJMaytag
- will nothing work???
DJMaytag
- 303sequencer
DJMaytag
- AW: E510
Magnus Danielson
- Looking for 6/89 Elec. Musician
Scott Evans
- Looking for 6/89 Elec. Musician
Scott Evans
- Drill presses (was: cutting holes)
Scott Evans
- Cv/Gate for my SH2000
Martin Fay
- Roland Service Notes
Colin Fraser
- Problems with MIDI-CV converter
Colin Fraser
- 5.333 Volt for Roland Filters
Colin Fraser
- Midi-CV part 2
Colin Fraser
- AW: From Teeth to Rubber (was: What means 'phaselocked'?)
Michael Zacherl - Bacher Systems EDV GmbH
- Looking for Vance Gloster
Aaron Goodisman
- Things on the WWW.
Soundwave [Chad Gould]
- FatMan Mixer Schematic on Music/Machines
Scott Gravenhorst
- Ask me on modular...2
Erik Gronberg
- SEM-style controls
Haible_Juergen#Tel2743
- AW: Heated PNP array?
Haible_Juergen#Tel2743
- Dividers
Haible_Juergen#Tel2743
- AW: From Teeth to Rubber (was: What means 'phaselocked'?)
Haible_Juergen#Tel2743
- PLLs to replace TOS generators
Haible_Juergen#Tel2743
- AW:Re: Mad Man Rambles about Noise Generators
Haible_Juergen#Tel2743
- shorter adress now
Haible_Juergen#Tel2743
- AW: SEM Style knobbies
Haible_Juergen#Tel2743
- AW: Some more ideas on Hammond-Synthesis
Haible_Juergen#Tel2743
- a few 4-voice questions
Haible_Juergen#Tel2743
- inexpensive pots ?
Haible_Juergen#Tel2743
- AW: my external-input amp (revised)
Haible_Juergen#Tel2743
- AW: Re: my external-input amp (revised)
Haible_Juergen#Tel2743
- 5.333 Volt for Roland Filters
Haible_Juergen#Tel2743
- My new project
Haible_Juergen#Tel2743
- AW: LM13700 vs. CA3080
Haible_Juergen#Tel2743
- AW: cutting holes
Haible_Juergen#Tel2743
- Etching Holes ...
Haible_Juergen#Tel2743
- Joystick supplier
Haible_Juergen#Tel2743
- CNY-17
Haible_Juergen#Tel2743
- AW: E510
Haible_Juergen#Tel2743
- FWD: Ric Miller update
Matt Haines
- Ric's Back!
Matt Haines
- my external-input amp (revised)
Matt Haines
- my external-input amp (revised)
Matt Haines
- amateurs not welcome (was: my external-input amp)
Matt Haines
- FET pin-outs
Matt Haines
- FET pin-outs
Matt Haines
- rite of passage
Matt Haines
- cutting holes
Matt Haines
- will nothing work??? (is 606 LT trig out a v-trig???)
Matt Haines
- cutting holes
Matt Haines
- cutting holes
Matt Haines
- Heavy Metal
Matt Haines
- Touch Kbds
Dan Higdon
- ASM-1
Dan Higdon
- ASM-1
Dan Higdon
- amateurs not welcome
Dan Higdon
- Stretching Time...
Dan Higdon
- ASM-1/MAT-02
Rich Holmes
- UNSUBSCRIBE PROBLEMS
Rick Jansen
- Moog ladderfilter (VCF)
Rick Jansen
- inexpensive pots ?
Rick Jansen
- STOP! (was: amateurs not welcome)
Rick Jansen
- cutting holes
Rick Jansen
- Things on the WWW.
Rick Jansen
- Problems with MIDI-CV converter
Isac Georg Jensen
- Midi-CV part 2
Isac Georg Jensen
- Midi-CV part 2
Isac Georg Jensen
- Update on Midi-CV interface
Isac Georg Jensen
- for sale: ARP Odyssey
Jones
- Cutting slots for slider pots
R.G. Keen
- Cutting slots for slider pots
R.G. Keen
- Etching Holes ...
R.G. Keen
- Etching Holes ...
R.G. Keen
- Things on the WWW.
R.G. Keen
- Analog Devices VCA ???
R.G. Keen
- Simple Power Supply Stuff
R.G. Keen
- ASM-1?
LARRY S LEITNER
- making panels...
LARRY S LEITNER
- Calling all solder-heads!
Kevin Lightner
- Some more ideas on Hammond-Synthesis
Kevin Lightner
- The parts hunt...
Kevin Lightner
- ASM-1 pictures
Kevin Lightner
- Digital noise generation
Kevin Lightner
- Modular patch system
Kevin Lightner
- Ring mod IC's
Kevin Lightner
- IC IC - 531?
Kevin Lightner
- cutting holes
Kevin Lightner
- Etching Holes ...
Kevin Lightner
- Modular synths/Eurocards
Niklas Lindberg
- FET pin-outs
Niklas Lindberg
- Midi-CV part 2
Niklas Lindberg
- Midi-CV part 2
Niklas Lindberg
- Re(2): Modular patch system
Niklas Lindberg
- (Re(2): Modular patch system)
Niklas Lindberg
- Moog music online ?
Niklas Lindberg
- DIY samplers
Christopher List
- SEM Style knobbies
Christopher List
- AW: SEM Style knobbies
Christopher List
- AW: SEM Style knobbies
Christopher List
- ASM-1
Christopher List
- ASM-1/MAT-02
Christopher List
- inexpensive pots ?
Christopher List
- LM13700 vs. CA3080
Christopher List
- Used my modular in a show this weekend...
Christopher List
- rite of passage
Christopher List
- Quantizer questions
Christopher List
- cutting holes
Christopher List
- AW: cutting holes
Christopher List
- Joystick supplier
Christopher List
- Idea for a CV quantizer
Christopher List
- Analog Devices VCA ???
Christopher List
- 303sequencer
Christopher List
- V909 v.3 is at Hyperreal...
Christopher List
- [Fwd: moooooooooooog]
J P M
- my external-input amp (revised)
MACHINE MEDIA
- 5.333 Volt for Roland Filters
MACHINE MEDIA
- cutting holes
MACHINE MEDIA
- Stupid question about synth power-supply!!!
MACHINE MEDIA
- cutting holes
MACHINE MEDIA
- AW: cutting holes
MACHINE MEDIA
- Heavy Metal
MACHINE MEDIA
- 303sequencer
MACHINE MEDIA
- Simple Power Supply Stuff
MACHINE MEDIA
- rite of passage
William M. Maciejewski
- DIY samplers
Richard Martin
- From Teeth to Rubber (was: What means 'phaselocked'?)
Matthias
- Re(2): Modular patch system
Per Mattsson
- Re(2): Modular patch system
Tom May
- it's time, but is it the place??
J.D. McEachin
- Analog Devices VCA ???
J.D. McEachin
- Analog Devices VCA ???
The drink coaster formerly known as Damien Miller
- ASM-1 board recieved
Kevin Moon
- Stretching Time...
Kevin Moon
- Some more ideas on Hammond-Synthesis
Daniel Oberfeld
- No subject
I. Onsager
- Synthex / OSCar manuals wanted
I. Onsager
- ASM-1/MAT-02
Mark Pulver
- v-trig to s-trig???
Mark Pulver
- rite of passage
Mark Pulver
- rite of passage
Mark Pulver
- rite of passage
Mark Pulver
- Moog music online ?
Mark Pulver
- Moog music online ?
Mark Pulver
- Moog Music Pricing
Mark Pulver
- [Fwd: moooooooooooog]
Mark Pulver
- Things on the WWW.
Roy Roberts
- Stretching Time...
Stuart Robertson
- Wanted: 6850 UART Description
Rene Schmitz
- FET Transistors
Rene Schmitz
- opinions on HIFLI - Diode based phasing ?
Rene Schmitz
- analog-switch phaser schematics online
Rene Schmitz
- Temperature compensated VCO
Rene Schmitz
- Space Echo sound on sound
Rene Schmitz
- New stuff on website
Rene Schmitz
- Sheppard Generator Question
Rene Schmitz
- Mad Man Rambles about Noise Generators
Scott Gravenhorst, Synthaholic
- Mad Man Rambles about Noise Generators
Scott Gravenhorst, Synthaholic
- Mad Man Rambles about Noise Generators
Scott Gravenhorst, Synthaholic
- Mad Man Rambles about Noise Generators
Scott Gravenhorst, Synthaholic
- More shift register stuff
Scott Gravenhorst, Synthaholic
- LM13600 VCO On the Board and working...
Scott Gravenhorst, Synthaholic
- ASM-1?
Troy Sheets
- rite of passage
Troy Sheets
- E510
Anders Sponton
- AW: E510
Anders Sponton
- Front panels
Anders Sponton
- New Email Address
Synthaholic
- A Complex Waveform Generator
Synthaholic
- What means 'phaselocked'? (was: Re[3]: Fourier-Analysis
Don Tillman
- Grungy Digital Tonewheels (was Re[3]: What means
Don Tillman
- Mad Man Rambles about Noise Generators
Don Tillman
- Mad Man Rambles about Noise Generators
Don Tillman
- AW(2): Re: butter and pole locations
Don Tillman
- Mad Man Rambles about Noise Generators
Don Tillman
- Electro Notes UK
Don Tillman
- Mad Man Rambles about Noise Generators
Don Tillman
- AW: Some more ideas on Hammond-Synthesis
Don Tillman
- my external-input amp (revised)
Don Tillman
- my external-input amp (revised)
Don Tillman
- amateurs not welcome (was: my external-input amp)
Don Tillman
- amateurs not welcome
Mathias Tornqvist
- Heated PNP array?
Joachim Verghese
- ASM-1/MAT-02
Joachim Verghese
- 5.333 Volt for Roland Filters
Joachim Verghese
- Midi-CV part 2
Joachim Verghese
- LM13700 vs. CA3080
Joachim Verghese
- Adding feedback to a VCF
Erik the ViKing
- The Building Plans!!!!
Erik the ViKing
- Calling all solder-heads!
Erik The ViKing
- 5.333 Volt for Roland Filters
Erik The ViKing
- Sarcasm and FM-patches
Erik The ViKing
- Stupid question about synth power-supply!!!
Erik The ViKing
- Things on the WWW.
Erik The ViKing
- Rick Jansen's Moog VCF PCB
Erik The ViKing
- Things on the WWW.
Erik The ViKing
- THE ARCHIVE????
Erik The ViKing
- amateurs not welcome (was: my external-input amp)
Tim Walters
- ASM-1/VCS-3 with patch memory?
Tim Walters
- Modular patch system
Tim Walters
- Re(2): Modular patch system
Tim Walters
- Calling all solder-heads!
Kent Williams
- potentiometers, ASM-1
Brent L. Wood
- Looking for 6/89 Elec. Musician
Bob Zimmer
- Neat Device!
Bob Zimmer
- inexpensive pots ?
Bob Zimmer
- Cutting slots for slider pots
Bob Zimmer
- cutting holes
Bob Zimmer
- Drill presses (was: cutting holes)
Bob Zimmer
- Joystick supplier
Bob Zimmer
- Joystick supplier
Bob Zimmer
- Simple Power Supply Stuff
Bob Zimmer
- on Pot
KLEIN_B at a1.wdc.com
- on Pot (dejavu)
KLEIN_B at a1.wdc.com
- digital controller
KLEIN_B at a1.wdc.com
- Just a newbie
Fretnoize2 at aol.com
- A vco that Ive got working!!!
Paul.Maddox at bew.co.uk
- Shame
Paul.Maddox at bew.co.uk
- Modular patch system
Paul.Maddox at bew.co.uk
- ASM VCO
Paul.Maddox at bew.co.uk
- ASM VCO
Paul.Maddox at bew.co.uk
- (Re(2): Modular patch system)
fEEd
- Grungy Digital Tonewheels -Take 2
gstopp at fibermux.com
- SEM Style knobbies
gstopp at fibermux.com
- AW: SEM Style knobbies
gstopp at fibermux.com
- ASM-1
gstopp at fibermux.com
- ASM-1/MAT-02
gstopp at fibermux.com
- a few 4-voice questions
gstopp at fibermux.com
- inexpensive pots ?
gstopp at fibermux.com
- FET pin-outs
gstopp at fibermux.com
- Modular patch system
gstopp at fibermux.com
- cutting holes
gstopp at fibermux.com
- Clap Generator
Bob.Schrum at harpercollins.com
- Another word on front panels
Bob.Schrum at harpercollins.com
- DIY samplers
julian higginson
- Electro notes - UK
julian higginson
- strange...
john..
- v-trig to s-trig???
john..
- will nothing work??? (is 606 LT trig out a v-trig???)
john..
- will nothing work??? (is 606 LT trig out a v-trig???)
john..
- Paul Maddox???
john..
- Moog music online ?
jupiter4
- 303sequencer
michal mcelhany
- forced clocking
rbussell at mlsma.mlm.att.com
- Mad Man Rambles about Noise Generators
johns at oei.com
- How does din-sync work?
Paul_Wilkinson at radical.ca
- forced clocking
K.Dunnicliffe at uk22p.bull.co.uk
- Moog Music Revived!
william.b.fox
Last message date:
Sat Jun 29 01:01:38 CEST 1996
Archived on: Fri Apr 1 13:00:45 CEST 2022
This archive was generated by
Pipermail 0.09 (Mailman edition).