MODULES USED:

MOTM: 101, 410, 320, 300, Wiard/Blacet Miniwave

This patch was created by taking the s&h output and plugging it into the 1V/OCT jack on the 300 VCO. I then ran the SAW out from the 300 into the input of the Miniwave. To make things a little wacky I took the SINE out of the 300 and plugged it into the Miniwave WAVE jack. This gave a ultra rapid shift in the Wave sequencing. I then let each BANK play for a few seconds before manually advancing it by hand. To top it all off I ran the output of the Miniwave into the triple Res filter which was having its SWEEP modulated by the SINE output of the 320 LFO.


Cheers,
John