P3 Bootloader Patch for Sequentix Sysex ID
==========================================

This patch will modify the P3 bootloader (either T89 or AT89 version) to use
the official Sequentix Music Systems Midi Manufacturer ID.
This will be required for future firmware image updates.

To do this, follow this procedure:

1. Enter Firmware update mode (hold FUNC+PAGE at power up)

2. Press F3 - Flash

3. Transmit SysxIDPatch.syx to P3

Display should show:

	size0300 chk0C9D
	boot       flash

4. Press F1 - boot

Display should show

	Patching ID...OK
         Load new image

5. Power off, then turn back on in Firmware update mode (FUNC+PAGE again)

6. Press F3 - Flash

7. Transmit P3 main program v3.1.002 or later

8. Restart as normal