MOTM

At 20:27 +0000 12.08.04, elherbus wrote:
>How difficult is it to convert AS modules to MOTM format?  (I'm
>intrigued by the RS310 reverb/chorus...)  I assume that in addition
>to the wiring for pots and jacks I would have to change the power
>connector, but I don't know what else would be involved.  Looking at
>their website, it doesn't appear that the modules are offered as
>kits, only preassembled.  Is this going to be a huge headache?

It depends on what you want to do.
Alternative 1: Remove the AS front panel and jacks (and pots?), 
change power connector. New MOTM front panel, jacks, (pots), knobs 
and some bracket to secure the PCB. Should be easy enough. Most of 
the job will be in getting a new front panel with all the text and 
graphics, as well as changing the power connector.
Alternative 2: Using the original front panel, but place it within a 
MOTM front panel, a la the way Blacet modules can be mounted within 
MOTM modules. You still need to add 1/4" jacks and wire the jacks and 
change power connector.

I would go for alternative 1, but both alternatives have their ways.


-- 
tw.  :)