Lpc2000

say, 4 layer? one of my friends has a proto-board for his hobbist 
project and wanna find a cheapest board maker to realize. 

thanks very much!

-Huang

----- Original Message ----- 

From: "shirihuang" <shirihuang@...>
To: <lpc2100@yahoogroups.com>
Sent: Thursday, January 15, 2004 7:13 PM
Subject: [lpc2100] can olimex handle multi-layer board


> say, 4 layer? one of my friends has a proto-board for his hobbist
> project and wanna find a cheapest board maker to realize.

They can only do single- or double-sided boards. PCB-Pool is about the
cheapest place for 4-layer boards.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@...
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html

At 16:31 2004-01-15, you wrote:
>They can only do single- or double-sided boards. PCB-Pool is about the
>cheapest place for 4-layer boards.

  Also I would suggest to quote at E-Teknet (http://www.e-teknet.com). They 
have delivered us many multilayer boards at excellent prices (4/6/8 layers, 
6mil traces, 12mil holes, gold immersion, testing, etc.). They also have a 
10%-off policy from other vendor prices.

  Regards.


--
PabloBleyerKocik /"...I didn't want to be kissing Kevin Spacey.
  pbleyer        / Come on! Lying there naked with rose petals?"
   @... /- Kirsten Dunst on turning down American Beauty