Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

RE: [Digital BW] Re: MIS inks

2005-03-19 by Paul Roark

Did the top, clear label-like cover intrude at all in the fill hole?  I
reamed mine out a bit to be sure the stoppers would seal.

Paul
www.PaulRoark.com 



> -----Original Message-----
> From: Johnny Eades [mailto:jeades1@...]
> Sent: Saturday, March 19, 2005 7:48 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: MIS inks
> 
> 
> 
> 
> 
> I received my new 1280 spongeless carts yesterday and installed them.
> The red light came on and stayed on. I called MIS tech support and
> was given a suggestion that helped me solve that problem. On the cart
> there is a yellow square of plastic that has the chip attached to it.
> They said to slightly move it down and insert a piece of business
> card thick paper at the top so the yellow chipholder would not quite
> slide all the way back up. It took two pieces of card paper but that
> allowed the chip reader fingers on the printer to make correct
> contact with the chip. This batch of carts was returned to the
> manufacturer (all but mine?) and the newer batch that they have is
> correctly manufactured to eliminate that .025 inch error. They were
> very cordial and efficient in solving my problem even though it was
> right a their closing time.
> 
> Your friend in Photography,
> 
> Johnny
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark"
> <paul.roark@v...> wrote:
> > If these are the new EZ-refill type carts, using a bottom-fill
> adapter (with
> > its snout shortended to 7 mm) to pull the air out the bottom --
> that is
> > "prime" the cart" -- is the best way to eliminate what can be a
> large
> > bubble.  I always prime the EZ refill and sponge-less carts I
> fill.  They
> > almost always then have a perfect initial nozzle check.
> >
> > Paul
> > www.PaulRoark.com
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to
> unsubscribe, please edit your Membership preferences by visiting this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages to keep
> them short.
> - Good manners are required at all time. No personal attacks or flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital B&W
> printing. Users who persistently make off-topic posts may be removed from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group Owner
> and Moderators. See "Group Topic, Rules and Guidelines" in the Files
> section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO
> YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
> EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF
> PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE
> "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE
> OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii)
> UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii)
> STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT
> YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE
> PRINT YAHOO GROUP.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.