touch the back side of the boards with your finger in behind the 2
foot (blue)trimpot....you will hear a fluctuation in pitch for the card
on the key you are holding down.....forcard m8 in each bank repeat a key
7 times and while holding the 8th note press the 9th to tune(release the
8th while holding 9th to tune 9th note
Quazimodo wrote:
> Hi folks,
>
> OK I'm gonna tune her again, it's about time....
>
> I did it a few years ago and at the time I did the 'touching-the
> screwdriver' thing to "hear" which board was active.
>
> Since then though, I have heard on here that this can lead to blown
> components. I also remember one of you had an LED panel to indicate
> the status.
>
> My questions is, without any special gear -(I am using a digital
> multimeter with onboard frequency counter for tuning)- how should I
> monitor which card/voice is active and not be in danger of blowing
> anything please?
>
> Cheers
> TOM
>
>
>
>
>
> SPONSORED LINKS
>
Music sampler Unit Sampler
> -----------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> + Visit your group "yamahacs80" on the web.
>
> + To unsubscribe from this group, send an email to:
> yamahacs80-unsubscribe@yahoogroups.com
>
> + Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
> -----------------------------------------------------------------------
>
[Non-text portions of this message have been removed]