David
You made an amazing work with your CS-80 and even if we disagree onto some technical things I wish you can get the reward you deserve for such a work of love. I'm in Italy and unfortunately I haven't room for it , not counting the fear for letting the machine be tranported by someone else who's not me...I wish also the buyer will make a responsive use of the old boy and let it not take dust....
Max
----- Original Message -----
From: David Rogoff
To: AH analogue heaven AH ; yamahacs80@yahoogroups.com ; arturiacs-80v@yahoogroups.com ; oldsynths@yahoogroups.com
Sent: Monday, December 19, 2005 1:52 AM
Subject: [yamahacs80] Yamaha CS-80 for sale
For sale: Yamaha CS-80, not counting modulars (or it's god-father, the
GX-1), the heaviest, most knobs, most fun synthesizer ever built.
We're talking 171 knobs! 50 switches! No LCDs, no menus, no MIDI
(although you can buy the Kenton MIDI kit for it)!
The keyboard is in very good condition. The panel and keyboard are
almost like new and the tolex and hardware on the case is in pretty good
shape. All the knobs work. It's been in a smoke-free home for at least
the last few years, and has no signs of any smoke exposure before that.
It has not been moved around or gigged with for at least several years.
More details below.
I've had a great time bringing serial # 1646 back to good health, but
it's time for me to sell it to a new, good home. For better or worse,
I'm a much better techie/engineer than musician. I've had my fun, but
now that it's all working well, it should be played and used to make
great music. And I need to sell it to be able to pay for my next project :^)
I've owned/fixed up a few CSs over the years. I got a used CS-60 in
1981, which I had for a couple of years (and modified heavily). I had a
CS-80 in 1986, which I fixed up and kept for about three years. I got
my last CS-80 in 1995, and only had for a few months (lightening load
during a divorce). I keep telling myself not to buy keyboards that
weigh more than I do, but the CS-80 is too much fun. I hope by the time
(2015?) I feel the urge again, someone will finally make a new keyboard
that can rival it.
Here's some details about its condition and what I've done to it (there
are tons of pictures of the outside and inside during my restoration at
http://www.therogoffs.com/cs80):
Electronically:
To start with, this CS-80 has the second highest serial number I've
seen, so it was one of the last ones made. This means, not only that
it's not as old as many others, but that it has the last rev of the VCO
chips. These are the most stable for tuning and didn't require any
modifications for temperature tracking, like Yamaha recommended for
earlier units. The tuning wasn't bad when I got it, and since I did a
complete tuning on it, it is super accurate over all keys, octaves, and
voices. I often have to detune the second voice bank to make sure it's
there because the VCOs are dead on.
CMOS:
As well documented on Old Crow's excellent website (www.cs80.com), the
CS-80 had a few design mistakes. Almost all the digital control logic
is built using 4000-series CMOS chips. These chips, especially the
older ones, could be very sensitive to static and can also fail over
time. Luckily, these are still made today. As recommended by Crow, and
other CS techs, I have replaced every 4000-series CMOS chip with new
ones for many more years of life. In addition, I have put all of the
new chips in sockets, so if there is a failure in the future, it will be
relatively easy to find and fix. Yamaha also had very few bypass
capacitors on the digital boards (none on one!). These caps help keep
the power supplies quiet and the parts happy. I've added a bypass caps
for almost every single digital chip. In addition, I added larger
bypass caps on each board. This work took a lot of $$$ in parts and
more rework hours than I can remember, but it's a great insurance policy
for the future life of the keyboard.
Power supply:
Almost every piece of electronic gear, from stereo amps, to
synthesizers, use electrolytic capacitors in their power supplies to
smooth the AC voltage from the wall socket into nice, smooth DC voltage
for the internal circuits. These capacitors have kind of a gel in them
that drys out over the years, degrading their performance, until the are
non-functional. In old amplifiers, this commonly results in increasing
hum. I have removed all of these caps from the power supply and
replaced them with new ones. Since modern caps are smaller than their
older, same-value parts, I was even able to put larger value caps in
some places (larger generally equals better for power supplies caps). I
even replaced the caps used in series with the headphone jack.
Keys: I removed all the keys and washed them. There's a few really tiny
marks, but overall I'd give them an A. They all feel nice too: initial
touch (velocity - can control volume, brightness, and pitch bend) and
after-touch (polyphonic pressure - can control LFO modulation and speed,
volume, and brightness) are working on all keys. As most fans know, the
poly aftertouch is one of the keys features of the CS-80. There are very
few keyboards that had this (I own two other: a Kurzweil MIDIBoard, and
a Roland A-50, which I'm restoring - but neither feel as good as the
CS-80). It's such a great and natural feature to be able to play a
chord and bring out one note by pressing that key harder. No keyboard
has been made with this for many years. I wish someone would bring it
back! I've also gone through all the key contacts, cleaning and
adjusting, to fix any intermittent triggering on any key.
Ribbon:
Besides the keyboard, the other great, rare feature on the CS-80, is the
ribbon controller. This lets you bend an note up an octave and down
infinity to zero! And it's relative, so you can touch it anywhere, and
that point becomes the starting point of the bend. It's also great for
guitar/violin-like trills: press anywhere with one finger and then tap a
trill with another finger. The ribbon works and looks perfect.
Cosmetics:
Panel: The front panel looks and works great. All knobs, buttons,
sliders, and lights are 100% functionally and cosmetically. I went
through every single one of the 171 knobs and 50 switches, including all
the little ones for the memories. Everything does what it's supposed to.
Case/Cover: The cabinet is in good condition. There are a few nicks in
the tolex and the chrome hardware isn't perfect, but overall a B+. The
case cover is a little rougher, maybe a B-, but who cares since it's not
on when you are playing, but it is important to have, to protect the
panel and keyboard. I've got the original casters that plug into the
case and cover. They are very useful for moving the CS-80 around short
distances, but for big moves, you'll want a flight case. I've also
replaced many missing washers that an unknown previous owner/technician
forgot to put back.
Stand: It's got the original Yamaha stand. A couple of the screws to
lock it to the CS-80 were missing, so I put together nice replacements
(metric #8 bolts!). I also added plastic furniture caps over the metal
feet so it wouldn't tear up my wood floor. There's some scratches and a
few small nicks, but it looks pretty good - maybe a B/B-. I don't have
the fancy carrying bag for the stand and pedals. The stand has a great
feature: it lets one person move the CS-80 by himself. Since it locks
to the keyboard, you can pretty easily (and I'm not very big) roll the
unit onto its casters and then move it, and then lift it back up onto
the stand. This is really helpful if there's no one around to help lift
it. However, it won't help when you get to a flight of stairs :^)
Music Rest: I could never find one of these! However, I got the
outline of one and tried to make one out of clear plexiglass. Well,
cutting plexiglass is harder than I thought, so it doesn't look that
hot, but it's ok, and it works, so it's yours, free with purchase...
Misc:
It's got the original Yamaha expression pedal, which can control volume
or a wah-wah effect. I've got a generic foot switch, which can control
sustain and/or portamento.
I'm also including a nice, double-sided printout of the owner's manual,
from the Yamaha site. I'll also give you a CDROM with all the pictures
I've taken of the keyboard and every bit of info I've found on the
Internet, including schematics, calibration procedures, theory of
operations, and more.
Sale info:
I wanted to offer this to group members first (sorry if some people, who
are on multiple synth group/mailing lists, get duplicate copies of
this). I'll keep it open to offers until after New Year's Day. If I
don't have a buyer by then, I'll put it on eBay. Bottom line: CS-80
that is better than A+ electronically and about a B/B+ cosmetically.
Comes with case/cover, casters, original stand, original expression
pedal, generic sustain/portamento pedal, music rest, and re-print of
owner's manual.
If you want one that looks and works better than new, please see the
amazing work that Kent Spong does for RL Music (see
http://www.rlmusic.co.uk/mals_site/sale_stock_01.html - near bottom of
page), but it's gonna cost you about three times what I'm asking. I'd
buy one if I had the money! Speaking of which, I'm looking for offers
starting at $3700. I'd prefer, and give priority to, local (Southern
California - Irvine) buyers who could come here, check it out in person,
and drive it away. As an added incentive, I'll even give it a free
tuning (if it ever needs it) after a few months, either at my place, or
yours, if reasonably close by.
If you need it shipped, you will pay all packing, shipping, and
insurance costs. I will have it professional crated and shipped by a
company that has experience shipping large musical gear. If you are
familiar with a particular company, I will check them out. From some
postings I've read, I would estimate it would cost about $500 to ship it
to U.K./Europe, but that's just a ball-park estimate.
I've been buying/fixing/selling synths over the Internet and through
local want-ads for about 25 years now (for fun, not for a living). I
have an extensive, great record for deals, including a perfect feedback
of over 200 on eBay
(http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback&userid=david72hq)
. I welcome any questions and invite any local buyers to arrange to
come by check it out in person.
Thanks,
David
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "yamahacs80" on the web.
b.. To unsubscribe from this group, send an email to:
yamahacs80-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
[Non-text portions of this message have been removed]