Of couse the eg gets affected Max..... ( The Cutoff freq(hpf&lpf)) is
the level of the sustain portion of the eg in the filter
section.....The Initial touch or velocity affects the overall brilliance
of the oscillator which in turn is( The Cutoff freq(hpf&lpf))....from
there the initial level((IL)0to-5) and after level((AL)0to+5) determine
the amplitude of your eg timings.......Now I am typing this slowly so
nothing gets missed here... If you use IL (0 to negative 5) your
attack start point and release end point are subtracted from ( The
Cutoff freq(hpf&lpf)) which we now realize is the sustain level.....If
you use AL (0 to positve 5) your attack end point and decay start point
are added on top of ( The Cutoff freq(hpf&lpf)) which we is the sustain
level.....therefore since( The Cutoff freq(hpf&lpf)) is affected by
velocity or initial brilliance, when you subsequently add or subtract
your EG depth from this sustain level, Yes, the eg gets
affected....absolutely....(8>{D
Max Fazio wrote:
> Hi LaurieWell, I was looking for Initial touch to see if it is only
> the cutoff to be controlled or even the Eg...to me calibration doesn't
> matter at this time since I just would like to see if, at high
> velocities even the Attack level is raised...this doubt makes me loose
> sleep...David (Rogoff) told me there is no difference between presets
> and panel sounds since the preset selector has only resistors linked
> to filter's cutoff...talking techie he told me that TRG1 going to
> R51-52 produces cutoff variations but I must disagree: I will send you
> some files that Tommy (Priakos) made of presets by playing them with a
> sequencer ( his CS80 has a Kenton aboard) to avoid any influence of
> the keyboard which is , you teach me, very sensitive. Those files
> apply velocity ONLY to Attack level!!! And if you go to your machine
> you'll realize what I'm trying to explain...Thx ;-) !!
>
> ----- Original Message -----
> From: laurie
> To: Max Fazio
> Sent: Saturday, December 17, 2005 5:41 PM
> Subject: Re: a velocity test
> I would like to help but my eg needs calibration on all of
> my m cards....I have attack and release issues on my unit in
> both vca and vcf......re-cap time I presume....If its a
> timing thing Max with the after touch your seeking....I know
> my instrument.....time is not affected by
> aftertouch....overall level is....overall filter is
> .....subosc in vco/vcf/rate is.....this means whatever
> envelope you have set in these area's have a greater range
> in level but the time is constant to your setting.......
>
> Max Fazio wrote:
>
> > Hi LaurieI wouldn't bother but I wish you can make me
> > another sample from your CS-80: can you build a panel
> > sound with high Attack level and short Attack and Decay
> > time then playing it with full Initial brilliance at
> > different velocities?Can you help me?? I know the V won't
> > be ever lke the real thing then I want to collect as much
> > infos as possible in order to be able to code a software
> > CS80 one day...it's a dream but I want to make it
> > true...Thx!Max
>
[Non-text portions of this message have been removed]