Hi,
I have some bended key contacts in my CS-80.
I could try to bend the springs back in the original shape. It will be difficult because it is very tiny and has to be done with surgeon precision and I do not want to do it anymore harm. Before I do that I would like to know if somebody has a spare PCB `Yamaha LC 21 571 JCI-AK H' completely with the springs on it, so I can use it as an easy drop in replacement?
You can find pictures of the print I am searching on my flickr account :
http://www.flickr.com/photos/41267611@N06/sets/72157629112502438/Anybody has other tips or advice on tools or techniques to adjust the springs back in original shape?
Already I purchased a 2nd hand Yamaha CP-30 piano. This piano has the same keyboard in it. But the prints with the key contact springs are not identical as in the CS-80. Although the black plastic key spring holders and the contact springs it selves are the same.
This week I phoned with Kent Spong. Kent told me he tried once do use contact springs from a Yamaha CP-20. He desoldered the springs. But the springs are clicked in the black plastic holder and not removable. Removing the springs from the holder would be destructive. So I do not suspect that will be a success to try.
Any advice, I would be grateful,
Greetings,
Lt