nice work.. wheels would be handy.. hurt my brother moving my CS last
week.. wimp
--- In yamahacs80@yahoogroups.com, "JH." <jhaible@...> wrote:
>
> I've finally taken a photo of what I've built.
> Taking up your ∗great∗ idea of using a pedestal, and combining it
with an
> integrated version of the wooden bars that allow ventilation.
>
http://launch.ph.groups.yahoo.com/group/yamahacs80/photos/view/b5ba?b=1&m=f&o=0
>
> JH.
>
> ----- Original Message -----
> From: "erikfromhere" <moogsynthex@...>
> To: <yamahacs80@yahoogroups.com>
> Sent: Tuesday, September 18, 2007 2:29 PM
> Subject: [yamahacs80] Re: Keyboard stand for CS-80
>
>
> I mentioned it before in this group, I use pedestals (as used in
> office-furniture) as stands for both my CS80's. Dimensions are: 60cm
> height, 80cm length, 40cm depth. They have 4 casters (not too small)
> so you can easily move the CS80 around. Besides, you can use the
> drawers to store your manuals, parts etc. There is enough room left
> for your legs and feet since the pedestal is at the flat part of the
> CS80. When sitting in front of the CS80, the drawers open at the
> left or rigt side to give you an idea. I placed some wooden bars
> under the synth not to obstruct ventilation.
> Good luck with restoring (do you have to ?)your CS80 when it gets
> in !
>