It needs to sweep between -5 volts and +5 volts.
I'm not aware of anything currently commercially available that
would do it.
About 10 years ago, I did get a repair shop to modify a Maplin passive
swell pedal so that it sent out the required voltages,
but the pot was just always all crackly so I never really have gotten
much use out of it.......
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.feline1.co.uk ----- Original Message -----
From: "Mike" <tubmyk2@comcast.net>
To: <PolySix@yahoogroups.com>
Sent: Sunday, May 08, 2005 1:14 AM
Subject: [PolySix] Anyone ever use the external VCF trigger in the back of
the P6?
> This looks very useful, as I can create filter swells with the cutoff
> freq.
>
> But how do I use it? I can't use an ordinary sustain pedal (I've
> tried)... in the manual it says to use the MS-01 footpedal but I'm
> sure those are long gone....can I make my own pedal for this? Or is
> there anything on the market nowadays that will work?
>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>
>