Archive of the former Yahoo!Groups mailing list: Discussion about the Korg PolySix synthesizer

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [PolySix] some help please

From: "Feline1" <feline1@felinedream.co.uk>
Date: 2004-04-27

it's "voila", you eejit - a French word - not "whalla"

LOL :-)

----- Original Message -----
From: "zephross" <hec_is@hotmail.com>
To: <PolySix@yahoogroups.com>
Sent: Tuesday, April 27, 2004 6:11 PM
Subject: [PolySix] some help please


> Hello All!!!
>
> I recently purchased a P6 and mine was close to dead, wierd sounds
> and blinky lights, well I decided to head out to the electronic shop
> and try the battery replacement project, since my battery had leaked
> and affected several IC's so I took those out, and the battery also,
> did a pretty good job of cleaning it out and resoldering it back. I
> happen to find at the electronics store a barrel drum type battery of
> the same voltage, so I decided not to go with the lithium upgrade,
> and I replaced the battery and bought 2 IC holders, WHALLA, I was
> done none of the traces were bad and all traces and contacts were
> verified. according to old crows website if after this procedure the
> CPU may be bad. well it looks that way .......... I get the same
> wierd distorted sounds as before. can anyone help?
>
>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>