And if that doesn't work, I have a full keyboard of polysix key contacts
that works that I'd sell you for cheap...
Lava
At 11:54 AM 8/12/01 +0200, André Hartung wrote:
>Hi Scott,
>
>under www.oldcrows.net/~oldcrow/synth/korg/polysix/index.html you find a
>detailed instruction on cleaning the contacts of your P6.
>If this doesn't help (but it helps in most cases), there is also the
>possibility to renew the coating of the rubber contacts. I saw a special
>conductive rubber fluid, which can be used to repair such contacts (I saw it
>in a mail-order catalogue in germany called 'Conrad').
>
>André
>
>
>-----Ursprüngliche Nachricht-----
>Von: Scott Shingle <raydeen@mindspring.com>
>An: PolySix@yahoogroups.com <PolySix@yahoogroups.com>
>Datum: Sonntag, 12. August 2001 10:02
>Betreff: [PolySix] [Poly 6]-Cleaning or replacing the key contacts
>
>
> > Hi. I've got an old Poly 6 that I found moldering in a friends
>basement. Everything worked on it except several of the keys have to really
>be mashed in order to produce sound, and even that's not consistent. I
>finally got up the courage to take it apart to see just what needed to be
>changed or cleaned. I got the keyboard unscrewed and removed the contact
>board. There doesn't seem to be anything wrong with the rubber contacts but
>it's possible they need to be replaced. Also, I noted that there were
>several spots where there could be missing plastic clasps. That is to say
>there are grooves under the keyboard where 2 or 3 plastic clasps (to hold
>the contact board in place) might have been but weren't. Just curious if I
>need to have all the slots filled or if several were left empty when these
>units were manufactured. To sum up, I have problems with the keys, the unit
>is apart, and I'm not sure how to continue. TIA for any and all
>advice. -Scott
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >To unsubscribe from this group, send an email to:
> >PolySix-unsubscribe@egroups.com
> >
> >PolySix "Digiest" Page: http://www.ing.umu.se/~me96kus/p6digi.html
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
> >
>
>
>To unsubscribe from this group, send an email to:
>PolySix-unsubscribe@egroups.com
>
>PolySix "Digiest" Page: http://www.ing.umu.se/~me96kus/p6digi.html
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/