It is not normal that it takes 20 miuntes to tune up. Usually it
takes about 10sec to tune and then it is quite stable.
Check the following: hold a key down when switching power on. The
generated note should change quite a lot until it stabilizes after
a few secs.
Are all six voice affected? Is the effect related to the MG setting
(VCA/VCF/VCO)? Is it related to PWM setting?
Peter Andersson wrote:
> Hi all,
>
> I'm the proud new owner of a Polysix. I love it! Can't take my hands
> off those knobs - the filters are just great! But I'm having a
> problem with it and I'm hoping someone can tell me what it's about
> and maybe even what can be done...
>
> After I've played the synth for a while, notes start to go out of
> pitch every now and then. It happens randomly every 10-30 sec or so.
> The notes go off pitch with a note or so and always jump or slide
> back to the original pitch again within half a second.
>
> At first I thought it was some filter setting of mine that caused
> it, but as it turns out I get this no matter how the Poly6 is
> programmed (or if I use a preset or a fresh "manual" sound). (By the
> way, it takes about 20 minutes for the unit to get in perfect tune
> after a cold start. Don't know if that's normal or if it's related
> to this problem in any way).
>
> I'd be truly grateful for any help!
>
> Peter
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/PolySix/
>
> To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
>