Hi
I have a Polysix whit a new clone pcb. I try to calibrate but is not posible. I try to explain my situation:
When the test switch is in normal. The p6 has the leds on for program 1 and 5 on but bank is not illuminated. And only works arpeggio and key assign mode. I try to make the calibration procedure for reset but nothing change of the lights in program section and the initial state of this procedure is wrong.
when i put the test switch in test mode the presets and banks works but the synth sound to bad.
in both situation the VCF and MG doesn't reacts.
I checked voltage, components and belive all is correct.
any idea
thanks for your time