Thank you very much!
--- In
PolySix@yahoogroups.com, greg montalbano
<greg.montalbano@u...> wrote:
> OK, one of the acceptable numbers is ALPS #SKHCAB -- Mouser
electronics
> sells them as #688-SKHCAB, for about .66 each.
> Other possible substitute: Omron B3F-4000.
>
> As I recall, the procedure is to first delsolder the LED, which is
holding
> the switch cap on. After that's removed, the four switch legs can
be
> desoldered.
>
> Good luck.
>
>
>
>
> >Date: Tue, 02 Dec 2003 09:28:47 -0800
> >To: PolySix@yahoogroups.com
> >From: greg montalbano <greg.montalbano@u...>
> >Subject: Re: [PolySix] Re: Replacement tactile switch and volume
pot
> >
> >Hi-
> >I've replaced several of the switches -- they're available off-the-
shelf
> >from a number of suppliers (will get you some numbers tonight).
> >Unfortunately, that's only the switch -- the switch CAPS are not
available
> >from any source I know of. (standard procedure is to save the old
switch
> >cap & mount it on the new switch).
> >As for the volume pot -- it's just a 10K linear taper pot; any
one of
> >that value that's the same size will work just fine. Check out
the online
> >catalogs for whatever electronics suppliers you use.
> >
> >~GMM
> >
> >At 04:30 AM 12/2/03 +0000, you wrote:
> >>No one here has ever replaced these particular parts?
> >>
> >>
> >>--- In PolySix@yahoogroups.com, "toorglick" <toorglick@y...>
wrote:
> >> > I love my revived PolySix. It only needs two more items to be
> >> > completely restored: a replacement tactile switch for program
> >>button
> >> > number four and the volume pot needs to be replaced. When I
go to
> >>my
> >> > electronics parts supplier, what should I ask for?
> >> >
> >> > Thanks,
> >> > Rich
> >>
> >>
> >>Yahoo! Groups
>
>>Sponsor<http://rd.yahoo.com/SIG=12cdgi7cl/M=266807.4061687.5387718.2
248467/D=egroupweb/S=1705032144:HM/EXP=1070425839/A=1861993/R=1/∗http:
//click.atdmt.com/AVE/go/yhxxxbre02200370ave/direct;wi.300;hi.250/01/&
time=1070339439623302>
> >>
> >>
> >>To unsubscribe from this group, send an email to:
> >>PolySix-unsubscribe@yahoogroups.com
> >>
> >>PolySix "Digiest" Page:
>
>><http://www.acc.umu.se/~amber/Poly6>http://www.acc.umu.se/~amber/Pol
y6
> >>
> >>Your use of Yahoo! Groups is subject to the
> >><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
> >
> >~GMM
> >Analog Synthesizer Service
> >http://home.earthlink.net/~klosmon/analogsynthservice/id1.html
>
> [Non-text portions of this message have been removed]