Well, cool.
Will send $30 today.
Regarding Polysix MIDI used on the Monopoly -- I've attached other MIDI
key assigner boards from the P6 to the MP; one issue to be dealt with
is the fact that the Monopoly keyboard starts on F, rather than C.
~GMM
On 4/18/2015 1:36 PM, Bob Grieb bobgrieb@yahoo.com [PolySix] wrote:
> Hello Group,
>
> I designed a small pc bd that plugs in in place of the PolySix key
> assigner
> and adds MIDI note on and note off. It can also trigger the
> arpeggiator using MIDI clk
> with various divide rates. MIDI channel and divide rate are set by
> holding down a key
> at power up, and are saved in EEPROM. No other features are added.
> No MIDI output
> is provided by my design.
>
> If anyone is interested, I can supply either a pc bd, or a pc bd
> and a programmed PIC
> chip if you want to build one. I don't plan to offer assembled
> boards. The pc bd plus
> programmed PIC chip is $27 + $3 S&H to USA addresses. The other
> parts to build up
> a board would cost another $10 or so, plus S&H from your supplier.
>
> I actually have two versions, one for the PolySix and one for the
> Poly61, since they used
> the same key assigner MCU. I think it should also work in the
> MonoPoly, but I have no way
> to test that.
>
> Bob Grieb
>
>
>
>