Archive of the former Yahoo!Groups mailing list: Discussion about the Korg PolySix synthesizer

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [PolySix] Re: Non-working attenuator

From: Bob Grieb <bobgrieb@yahoo.com>
Date: 2014-12-31

On the klm 367 board, there is a comparator output hooked into
The resistors driven by u35 outputs. I think this comparator
Will short the control voltage to gnd to mute the audio. So
Maybe this circuit is interfering with your volume control
Voltage.


From: tuk88@rocketmail.com [PolySix] <PolySix@yahoogroups.com>;
To: <PolySix@yahoogroups.com>;
Subject: [PolySix] Re: Non-working attenuator
Sent: Wed, Dec 31, 2014 3:46:18 PM

 

Hey Bob,

I already change the capacitor on the base, but no change on the attenuator...

What are you talking about the reset circuit ?