Archive of the former Yahoo!Groups mailing list: Discussion about the Korg PolySix synthesizer

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [PolySix] RE: Lots of pots not working

From: Bob Grieb <bobgrieb@yahoo.com>
Date: 2014-01-06

Check the 4.7K pullup resistor and the diodes and resistors around the comparator.   Maybe something is not connected on the pcb.    The logic probe could be acting as a pullup possibly.

    Bob


From: "josh.nursing@gmail.com" <josh.nursing@gmail.com>
To: PolySix@yahoogroups.com
Sent: Monday, January 6, 2014 9:49 AM
Subject: [PolySix] RE: Lots of pots not working, MG, VCF, EG.

 
Funny, I used the logic probe on CPU pin 1, and suddenly I get control over Cutoff, Res and EG Intensity (but it's flaky, as sometimes it happens).

Nothing changed, except the keyboard got disconnected and reconnected.