Archive of the former Yahoo!Groups mailing list: Discussion about the Korg PolySix synthesizer

previous by date index next by date
previous in topic topic list  

Subject: Re: [PolySix] tuning issue / where is VR2

From: Malte Rogacki <gacki@gacki.sax.de>
Date: 2013-09-25

If you have the widely circulating service manual (the one from the file
section) you'll find the correct tuning instructions for your board (which
is the older one). The addendum in this manual also gives the revised
tuning procedure for the new board (which also explains in part what the
other pots are doing then).

The Polysix went through two major different revisions for the voice board.
The one with the daughter board is the old revision.