Archive of the former Yahoo!Groups mailing list: Discussion about the Korg PolySix synthesizer

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [PolySix] no output except static and clicks!

From: Malte Rogacki <gacki@gacki.sax.de>
Date: 2013-06-23

This COULD at least partly be a problem with the KLM368A board (the effects
board).

You may want to check if you get a signal at CN14 on the voice board. This
is the actual output of the voice board; the signal then passes through the
effects board.
Sometimes the effects board can also get damaged from battery leakage
(because it's next to the battery).