interestingly enough a screw = hardware. that's neat :)
________________________________
From: Terje Winther <
terje.winther@wintherstormer.no>
To:
PolySix@yahoogroups.com Sent: Saturday, February 16, 2013 11:35 PM
Subject: [PolySix] Missing hardware - where to find?
I have a Polysix in for service that is missing a lot of hardware:
- the 4 bottom screws that hold the back end of the front panel are
missing
- the 4 top screws (two on each side) that holds the front panel in
place are missing
- a lot of the small black front panel screws that holds the panel
PCBs in place are missing
- the inside screws (wood screw type) that holds the processor board
in place are missing
- one of the screws for the pitchwheel/modwheel assembly (from the
underside) is missing
- one of the rubber feet (including the screw) is missing
The whole thing is barely holding together.
Amazingly enough the look of this P6 is quite good, and all front
panel elements (buttons, knobs, program caps etc.) are still there.
Technically it is in poor shape, and clearly someone has already tried
to do "service" - unsuccessfully, and didn´t even bother to assemble
the synth.
So: where do I start to look for hardware for the Polysix?
Terje Winther
terje.winther@wintherstormer.nohttp://www.wintherstormer.no/ [Non-text portions of this message have been removed]