hi Murray,
Thank you for your quick response! the memory chip was replaced by a TC5514APL-3 chip because the old mermory "HM472114-3" consumed a lot of current power ... i have also replaced all capacitor from effect board , and some at KLM 366
ps:when i turn cutoff knob to 10 the problematics sounds seems good ,without noise ...(but I have evidently no cutoff effect)
--- In PolySix@yahoogroups.com, Murray wrote:
>
> I repaired a P6 with a similar problem once (some patches working and
> others not and you couldn't overwrite the not working ones) and it
> turned out to be the memory chip. That particular chip seems to be very
> delicate and I have replaced a few of them over the years. Vintage
> planet has spares and I may have a couple in my parts bin if you are
> stuck finding one.
>
> MH
>
> On 12/02/2013 1:34 p.m., rafeek.2010 wrote:
> >
> > Hello everyone, first I would like to thanks for the outstanding work
> > you do
> > around this korg Polysix ...
> > >
> > > I post this message because I have a problem with and I can not
> > solve alone
> > ...
> > > after the famous battery problem , I replaced the card KLM 367 with
> > KLM-367A PCB Clone, everything goes well (thanks to Andrew Jury and
> > jed Jorgensen !!!) ..
> > Then I made the Polysix adjustment procedure from the service manual ,
> > everything is well done... but the problem is that the sound of some
> > presets of the "factory presets A" hear very bad (noisy) , here some
> > example A3, A7, B6) on all of 6 voices:
> > > http://soundcloud.com/rafdz/a3
> > > http://soundcloud.com/rafdz/a7
> > > http://soundcloud.com/rafdz/b6
> > some other has no problem p ex A1 ...it is very strange!
> > no change front knob, and it is the original presets
> >
> > > I started the procedure ( with millimetre , oscilloscope and
> > frequency meter )several times but no change adjustment
> > > may be the cutoff generates noise... ??? I really have no more solution
> >
> > Thank you for reading and hope to read you ...( sorry for my English
> > I'm a frenchy !!!
> > >
> >
> >
>
> --
> Kind Regards<br>
> Murray<br>
> murray@...<br>
> www.paintingwithsound.co.nz<br>
>
>
>
> [Non-text portions of this message have been removed]
>