Hi,
This forum really helped me - I finally fixed mine yesterday.
Curiously, one of the hurdles was the connectors to the 367 board, despite the fact that they look properly connected.
I would start there and eliminate the simple. I used isopropyl and cleaned the pins and I have seen posts where reseating the connectors solved the problem.
If that doesn't work, check underneath the board to see if any of the jumpers are disconnected.
After that, I would follow the lines from connector CN10.
Hope it's straightforward.
Regards,
Tony
--- In PolySix@yahoogroups.com, "raisinbag69" <raisinbag69@...> wrote:
>
> Hey there, I'm new here. I normally spend lots of time at Muff's but figured I should come here for help from the poly 6 pro's. My baby has been working fine until now. I bought it off a guy who restored it and I have opened it up to have a look and yah, like every other poly, it has past leak issues, which have been "rectified" so that it has been working fine for the last year.
>
> Anyway, here is the problem; when I start it up, it always reverts to the same patch sound. (even if I load new sounds from tape, OR create a new sound. Each time I turn it off and back on, it reverts to the same simple program. (I just measured the battery voltage and it is 3.17v) Also, when I choose any other patch OR bank, it switches to a sweeping filter sound program, and at that point no matter which program OR bank button I choose, there is no change in sound.
>
> I am totally new to yahoo, so I am a bit lost when it comes to searching and navigating my way around here, so I apologize if this is some totally common question. I am looking for a place to start trouble shooting. I am assuming it has to do with the 367 board, as I am noticing there is lots of chatter here about this board. I even noticed something in the "database" area, where it looks as if someone is doing a run of PCBs for the 367 (I just can't seem to find info about the detials)
>
> Anyway, if someone could point me to links or other good posts with solutions for the solving my problem that would be great. Thanks, I feel so awkward in this yahoo space, it will just take me a bit of time to get the hang of it.
>
> Cheers. Dave
>