I've checked inside and re-ajusted a few connectors (including CN10). So far, it seems to have fixed the problem. I'll keep a close on eye on the "patient" and report back if needed.
Thanks for the help !
-N
--- In PolySix@yahoogroups.com, The Old Crow <oldcrow@...> wrote:
>
> This sounds like the reset threshold trimmer (VR1) needs a small tweak.
>
> Crow
> /∗∗/
>
> On 8/11/2012 2:28 PM, marcomir27 wrote:
> > Hello,
> >
> > I need help with my Polysix. Here's the "symptoms":
> >
> > 1) All LEDs are staying on after power-up (tape is disabled); OR
> > 2) Everything is fine, but after 2-3 minutes it automatically returns to Patch 1, Bank 1.
> >
> > Any idea ?
> >
> > BTW, mine was recently restored with the KLM board clone. It worked well for a couple months before these problems appeared.
> >
> > Many thanks !
> > -Nicolas
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>