Archive of the former Yahoo!Groups mailing list: Discussion about the Korg PolySix synthesizer

Sorry about that, try pin 5 instead.

Don B.



_____

From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
tonezone020
Sent: Monday, July 23, 2012 8:30 PM
To: PolySix@yahoogroups.com
Subject: [PolySix] Re: Polysix contact strip





Hi Don,

That's very helpful.

I tested from pin 1 on IC31 across to the pins mentioned on both chips and
pin 4 in both are display differing resistances, whereas the others are
fine. Do you recommend bridging for to something in the chain ?

I very much appreciate your help.

Best wishes,

Tony

--- In PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com> ,
"backshall1" <backshall1@...> wrote:

>
> Pins 1, 4, 10, 13, 14 are all connected together to +5vdc.
>
>
>
> Don Backshall
>
>
>
> _____
>
> From: PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com>

[mailto:PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com> ] On
Behalf Of

> tonezone020
> Sent: Monday, July 23, 2012 7:46 PM
> To: PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com>
> Subject: [PolySix] Re: Polysix contact strip
>
>
>
>
>
> Hi,
>
> Looking at the schematics it's hard to tell - it doesn't seem like there

is

> one for the underside of the board ...
>
> Regards,
>
> Tony
>
> --- In PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com>

<mailto:PolySix%40yahoogroups.com> , Peter

> M�rck <peterm@> wrote:
> >
> > Just compare with the schematics?
> >
> > BR,
> > Peter
> >
> > ----- Original Message -----
> > From: tonezone020
> > To: PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com>

<mailto:PolySix%40yahoogroups.com>

> > Sent: Tuesday, July 24, 2012 12:52 AM
> > Subject: [PolySix] Re: Polysix contact strip
> >
> >
> >
> > Hi,
> >
> > Thanks for your message.
> >
> > I managed to sort the strips out - they had stretched, but with a bit of
> coaxing the keys are now working.
> >
> > Been slowly trying to fix the battery leak problem with a tiny bit of
> success and Old Crow's advice from his site.
> >
> > I discovered pin numbers 13 and 14 on IC31 are connected. Do you know if
> this should be so? There seems to be a copper trace on the underneath
> circuitry. It also appears to be the same for IC30...
> >
> > Thanks,
> >
> > Tony
> >
> > --- In PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com>

<mailto:PolySix%40yahoogroups.com> ,

> bastebraak <bastebraak@> wrote:
> > >
> > >
> > >
> > > Is the old one damaged or just not working well. I fixed the contacts

on

> my polysix with a paste i ordered online.
> > >
> > >
> > > Verzonden vanaf Samsung Mobiletonezone020 <swamp.gigs@> schreef:
> > > Hi All,
> > >
> > > Does anyone know where I can get a couple of 6 bubble contact strips

or

> alternatives for my synth, preferably in the Uk ?
> > >
> > > Many thanks in advance,
> > >
> > > Tony
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]