Hi,
Looking at the schematics it's hard to tell - it doesn't seem like there is one for the underside of the board ...
Regards,
Tony
--- In PolySix@yahoogroups.com, Peter Mörck <peterm@...> wrote:
>
> Just compare with the schematics?
>
> BR,
> Peter
>
> ----- Original Message -----
> From: tonezone020
> To: PolySix@yahoogroups.com
> Sent: Tuesday, July 24, 2012 12:52 AM
> Subject: [PolySix] Re: Polysix contact strip
>
>
>
> Hi,
>
> Thanks for your message.
>
> I managed to sort the strips out - they had stretched, but with a bit of coaxing the keys are now working.
>
> Been slowly trying to fix the battery leak problem with a tiny bit of success and Old Crow's advice from his site.
>
> I discovered pin numbers 13 and 14 on IC31 are connected. Do you know if this should be so? There seems to be a copper trace on the underneath circuitry. It also appears to be the same for IC30...
>
> Thanks,
>
> Tony
>
> --- In PolySix@yahoogroups.com, bastebraak <bastebraak@> wrote:
> >
> >
> >
> > Is the old one damaged or just not working well. I fixed the contacts on my polysix with a paste i ordered online.
> >
> >
> > Verzonden vanaf Samsung Mobiletonezone020 <swamp.gigs@> schreef:
> > Hi All,
> >
> > Does anyone know where I can get a couple of 6 bubble contact strips or alternatives for my synth, preferably in the Uk ?
> >
> > Many thanks in advance,
> >
> > Tony
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>