Hello Johannes,
thanks. Interesting mod is to be able to get the two waveforms at one time. I'll try this.
For the other ones, I'm starting to think that a clean midi upgrade would be the best solution. This seems to be a great improvment (I've seen your kit and what it does : great job!).
rgds,
Ed.
--- In PolySix@yahoogroups.com, Johannes Hausensteiner <johau@...> wrote:
>
> You can find this along with more mods I had made to my P6 before I did
> the MIDI kit in the files section of the list (Files/Mods/P6_MODS.ZIP).
>
> Have fun!
>
> Johannes
>
>
> On 17.05.12 22:04, Andrew Jury wrote:
> > Hi Team,
> >
> > Just for the record, routing the mod wheel to either the VCO or VCF is
> > possible if you have one of Johannes¹s MIDI kits. This comes as an option
> > extra/feature!
> >
> > Cheers,
> > Andy
> >
> >
> >
> > On 17/05/2012 17:58, "djangowes"<djangowes@...> wrote:
> >
> >>
> >>
> >>
> >>
> >>
> >>
> >> Hello,
> >>
> >> OK, I understand now. I thought the wheel could affect VCF OR VCA OR VCO (i'm
> >> sure i'm not the only one to have thought of this as it could be understand
> >> like this if we read the panel of the P6). So my P6 works as it should. Great
> >> news!
> >> It's a shame as it could have been cool to mod the vca or vcf alone with the
> >> wheel.
> >> Thanks to both of you backshall1 and klosmon.
> >>
> >> rgds,
> >>
> >> Ed.
> >>
> >> --- In PolySix@yahoogroups.com<mailto:PolySix%40yahoogroups.com> ,
> >> "backshall1"<backshall1@> wrote:
> >>>>
> >>>> The mod wheel is always connected to the VCO, and never to VCF or VCA,
> >>>> unless someone had made other modifications to the KLM-367.
> >>>>
> >>>> The LFO has two outputs labeled "A" and "J" on the circuit diagram (bottom
> >>>> right corner). The "A" signal goes to CN06 pin 1 out to the mod wheel and
> >>>> back in pin 2. From there it goes directly to the VCO MOD circuit on IC8.
> >>>> The "J" signal is controlled by the VCO/VCF/VCA switch and sends the amount
> >>>> selected by the Level control in the MG section to the correct destination.
> >>>>
> >>>>
> >>>>
> >>>> This doesn't sound like the way you expected it to work, but that's how it
> >>>> was designed. Changing the Mod Wheel should never affect the filter or amp.
> >>>>
> >>>>
> >>>>
> >>>> Don B.
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> _____
> >>>>
> >>>> From: PolySix@yahoogroups.com<mailto:PolySix%40yahoogroups.com>
> >>> [mailto:PolySix@yahoogroups.com<mailto:PolySix%40yahoogroups.com> ] On
> >>> Behalf Of
> >>>> djangowes
> >>>> Sent: Thursday, May 17, 2012 11:06 AM
> >>>> To: PolySix@yahoogroups.com<mailto:PolySix%40yahoogroups.com>
> >>>> Subject: [PolySix] Re: Modwheel VCO VCF VCA Issue
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> Ok. after some searches, I'm pretty sure it comes from the KLM367. My P6>>
> > had
> >>>> a battery leak then has been repaired before I have it.
> >>>> I'd like to know where is produced the LFO signal. (what part of the
> >>>> circuit). Then the idea would be to follow the signal and find the place
> >>>> (crossroads) where it has to choose between VCO, VCA or VCF.
> >>>> Anybody knows?
> >>>>
> >>>> thanks,
> >>>>
> >>>> --- In PolySix@yahoogroups.com<mailto:PolySix%40yahoogroups.com>
> >>> <mailto:PolySix%40yahoogroups.com> ,
> >>>> "djangowes"<djangowes@> wrote:
> >>>>>>
> >>>>>> Hello all,
> >>>>>>
> >>>>>> I've had a P6 for a year and I there is an issue about the modwheel.
> >>>>>> What it does is:
> >>>>>> _when Mod switch is set at VCO, then modwheel affects VCO pitch. It's
> > OK.
> >>>>>> _when Mod switch is set at VCF, modwheel modulates VCF AND VCO... KO.
> >>>>>> _when Mod switch is set at VCA, modwhell modulates VCA AND VCO... KO.
> >>>>>>
> >>>>>> So the two last position shows an issue. It is not supposed to modulate
> >>>> VCO each time.
> >>>>>> On the other hand it works nice when using MG with pots on control
> >>>> panel.
> >>>>>>
> >>>>>> Modwheel is linked to KLM369 then signal reaches KLM367.
> >>>>>> Problem with modswitch? I wonder where i should start to find the
> >>>> culprit.
> >>>>>> Does anybody know when the issue could come from?
> >>>>>> Thanks for any kind of help.
> >>>>>>
> >>>>>> rgds,
> >>>>>>
> >>>>>> Ed.
> >>>>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> [Non-text portions of this message have been removed]
> >>>>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>