--- In
PolySix@yahoogroups.com, "backshall1 \(dsl\)" <backshall1@...> wrote:
>
> I just tried to change the name and save Randy's project to a new one of my
> own and do some edits. Now, when I click on Randy's link, it sends me to the
> project I've started editting. Can somebody check the link below and see if
> it sends you to Randy's (Polysix KLM-367) or mine (Polysix KLM-367 x4 Don).
> I hate to think that Mouser let me wipe out Randy's project and just
> replaced it with mine instead of saving mine as a new one.
>
> Don B.
>
> _____
>
> From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
> rschnier1
> Sent: Saturday, December 04, 2010 11:02 PM
> To: PolySix@yahoogroups.com
> Subject: [PolySix] KLM-367A Clone -- Mouser Project parts list created
>
>
>
>
> Hi everyone,
> In the course of constructing a couple of the KLM-367A clone boards, I
> created a Project parts list based on the Google document from Jed and Andy,
> and made it available for general public access. The URL is:
>
> http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=a9422d6c6b
>
> If you've decided to order the parts from Mouser, using this Project has a
> couple advantages. First, it saves the time of keying in each part number
> and quantity -- you can just click on the "Order Project" button and all the
> parts from the Project will be placed in your shopping cart (where you can
> delete or add items as desired). Second, each part in the Project list has
> its corresponding reference number for the PC board (R2, C8, IC23, etc.)
> linked to it. When the order arrives, each part will be in a bag labelled
> with the PC board reference number right on the bag. Assembly is then
> simplified -- you just have to place the parts in each bag in the locations
> given by the reference numbers on that bag.
>
> I've cross-checked the Project against the Google document list a couple
> different ways and believe it is correct. That said, if you really want to
> be sure, you can always double-check the items in the shopping cart against
> the Google document before completing the order.
>
> Hope this is useful.
>
> - Randy
>
> P.S. the Project includes all corrections noted on Jed's site, including the
> C4 correction that was just found. It also includes both the standard C23
> and the alternate C23A sometimes needed in the clock generation circuit.
>
>
> SChaWeeeeeet!!...Thanks Randy!
>