I¹ve just been re-reading your post and you say that none of the LEDs light
at all? Does A1 light when the P6 is first switched on and not in test¹
mode?
Cheers,
A
On 13/01/2011 17:07, "ML" <f115@rocketmail.com> wrote:
>
>
> Hi Andy et al!
>
> Here's what I have so far:
>
> R56 - 14.95K
> R57 - 10.09K
> R73 - 0.995K
> R74 - 250.4
> R75 - 19.93K
> R83 - 1.796K (1/4 Watt though)
> R84 - 0.995K
> R85 - 4.63K
>
> VR6 - W201
> [http://canada.newark.com/jsp/search/productdetail.jsp?sku=62J1285]
> VR7 - W501
> [http://canada.newark.com/jsp/search/productdetail.jsp?sku=62J1293]
>
> Test switch is positioned this way:
> - Normal: Open
> - Test Mode: 1 & 2 selected
>
> Synth is set to default mode
> Manual mode isn't functioning in either normal or test mode so
>
> IC33 DAC is DAC08CPZ #1014
> [http://canada.newark.com/jsp/search/productdetail.jsp?sku=59K7898]
>
> I can pull R83 from an original board and I could certainly try to de-solder
> an original DAC too. I've had mixed results de-soldering ICs in the past so
> I'm apprehensive (but willing).
>
[Non-text portions of this message have been removed]