Hi Paulo,
I think considering the hell you are having with the old board you have made
the right move! I have built what must be over 10 of these for various
people and I have never once had problems setting up the d/a convertor. If
you work slowly and methodically through the build you will more than likely
have a working board by the time when you finish. However, don¹t forget
there are two tiny track mods to do which are detailed on Jed¹s site.
Cheers,
Andy
On 05/11/2010 19:42, "Paulo" <inocencio66@yahoo.com> wrote:
>
> So I just took the plunge and bought a clone off Jed.
> Until it arrives I´ll still try to fix the old board.
> Just hoping it won´t end up as described in message #2678 i.e. new board, same
> problem.
>
> Maybe the fault is elsewhere. CN10 carries signals related to almost
> everything that´s failing in this synth. Time to study what happens on the
> KLM-366B...
>
>
>
[Non-text portions of this message have been removed]