At 19:11 Uhr +0000 14.10.2010, Mike wrote:
> IC 32 has been removed on the KLM-367. That's about the only thing that I can
> tell so far. My MIDI board says Korg USA, Made in USA and 67-0392.
I have the PCB and instructions for a Johannes Hausensteiner kit here; the
instructions mention the following mandatory changes to KLM-367:
B) On KLM-367:
- Remove the backup battery. There is a lithium battery on the
new MIDI pcb you received.
- Disable mute circuit during tape interface mode:
- Cut pcb trace to IC5/pin3 directly at IC5/pin3 (solder side).
Be sure not to damage the passing by pcb trace.
- Connect IC5/pin3 to IC5/pin7.
- Connection cable to MIDI pcb:
- Solder the open ends of the supplied 10 way cable (drawing no
PS 6M 00 05 004) to the respective target points on KLM-367.
Refer to drawing.