Fantastic! Thanks again, Andy... From all of us!
Tony
--- In PolySix@yahoogroups.com, Andrew Jury <andy@...> wrote:
>
> Hi Tony,
>
> I just want to double check the data on the Farnell spreadsheet as there are
> some slight holes. Once done I will post this for all to see. Should be a
> couple of days, but well worth the wait!
>
> Cheers,
> Andy
>
>
> On 06/05/2010 00:18, "psicraft_designs" <tony@...> wrote:
>
> >
> >
> >
> >
> >
> > Hi Andy,
> >
> > I really could use that Farnell parts list - It turns out that Farnell's part
> > numbers ARE interchangeable with Newark's as you suggested, so if you could
> > email me the Farnell list I will go about searching it through and assembling
> > an equivalent project for us KLM board stuffers in North America.
> >
> > Thanks again for everything,
> >
> > Tony
> >
> > --- In PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com> , Andrew
> > Jury <andy@> wrote:
> >> >
> >> > Hi,
> >> >
> >> > I have a near complete list of parts using Farnell if you are interested.
> >> > Some of these parts are not difficult to obtain, even in a third worlds
> >> > county such as the UK! I believe that Farnell trade in the US as Newark¹.
> >> > For example 140-50N2-100J-TB-RC (Mouser) is equivalent to Farnell part
> >> > number 1141756 (10pF/50v ceramic). It also helps to have a line up of
> >> > different suppliers in case stock is not available. I could suggest a few
> >> > but I think they are UK only. What we need is someone selling a bag of
> >> > components along with the boards so that it is a complete kit!
> >> >
> >> > Cheers,
> >> > Andy
> >> >
> >> >
> >> > On 21/04/2010 20:09, "psicraft_designs" <tony@> wrote:
> >> >
> >>> > >
> >>> > >
> >>> > >
> >>> > >
> >>> > >
> >>> > > Hi everyone,
> >>> > >
> >>> > > As a member of the groupbuy set up by HyperJed, I am going about
> >>> acquiring the
> >>> > > parts needed to populate the new KLM367-a PCBs I have coming - No doubt
> >>> there
> >>> > > are many of you in the same boat.
> >>> > >
> >>> > > Jed has been thoughtful enough to provide parts lists on the group buy
> >>> list,
> >>> > > but of course this is only the main piece of the pirate's treasure map
> >>> and not
> >>> > > the buried chest of doubloons we are after - I am starting this thread
> to
> >>> > > serve as a focus for our combined efforts to source and order all the
> >>> parts
> >>> > > required from the numerous vendors in question.
> >>> > >
> >>> > > Let me start with with a note for those who plan to order from Mouser: I
> >>> have
> >>> > > imported Jed's list into a mouser project that contains most of the
> >>> available
> >>> > > parts in one big order. If anyone would like to get access to this
> >>> please let
> >>> > > me know and we'll set it up via private message. You can order this
> >>> project's
> >>> > > parts as one package for around $60 USD (depending on your local
> >>> exchange
> >>> > > rates) and it includes all of the mouser part numbers in Jed's parts
> >>> list with
> >>> > > the exception of the following: 140-50N2-100J-TB-RC. This part is a
> >>> ceramic
> >>> > > disc capacitor that mouser will only sell in lots of 2000 (!).
> >>> > >
> >>> > > There are also a number of items in this project that mouser has listed
> as
> >>> > > backorder. They are:
> >>> > >
> >>> > > PART DESCRIPTION REQ'D
> >>> > > 291-62K-RC Carbon Film Resistors 62Kohms 0.05 1
> >>> > > 291-68K-RC Carbon Film Resistors 68Kohms 0.05 1
> >>> > > CMF5510K000FHEK Metal Film Resistors 1/4watt 10Kohms 1% 1
> >>> > > 291-22M-RC Carbon Film Resistors 22Mohms 0.05 1
> >>> > > 291-2.2M-RC Carbon Film Resistors 2.2Mohms 0.05 1
> >>> > > UFW1H100MDD Aluminum Electrolytic Capacitors 5
> >>> > > HEF4066BP,652 Multiplexer Switch ICs QUAD BILATERL SW 1
> >>> > > CD4051BEE4 Multiplexer Switch ICs 8-Channel Analog 2
> >>> > > CD4011UBEE4 Gates (AND / NAND / OR / NOR) Quad 2-Input 3
> >>> > > TL072ACP Op Amps JFET Input Low Noise 3
> >>> > > CD4042BE Latches Quad D-Type 6
> >>> > >
> >>> > > If you order the project without removing these items they will go into
> a
> >>> > > backorder, which may not be what you want.
> >>> > >
> >>> > > For a starting question to the group, I am interested to know if anyone
> >>> has a
> >>> > > source on the 140-50N2-100J-TB-RC (or has bought 2000 of them and would
> >>> like
> >>> > > to sell a few ;-) ) and also if there are any opinions about simply
> >>> doing a
> >>> > > backorder with Mouser vs. ordering these out of stock parts from an
> >>> alternate
> >>> > > supplier like Digi-Key.
> >>> > >
> >>> > > Let the games begin... !
> >>> > >
> >>> > > Tony
> >>> > >
> >>> > >
> >>> > >
> >>> > >
> >>> > >
> >> >
> >> >
> >> >
> >> > [Non-text portions of this message have been removed]
> >> >
> >
> >
> >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>