Hi M,
I believe you can get the tactile switches from Mouser (www.mouser.com).
They are made by ALPS Electric and have the part number 688-SKHCBHA010. The
pots are regular 10K linear types (check the manual!) but the problem you
always slam into is that they have right angled legs. I have myself, in the
past, used off the shelf straight legged or tagged type and have run hard
wires down to the PCB below. Not ideal, but needs must sometimes. You never
know, someone in the forum might have some other ideas!
Cheers,
Andy
On 21/12/2009 22:51, "ML" <f115@rocketmail.com> wrote:
>
>
>
>
>
> Actually I've used him before for some Roland parts. He's a great seller. The
> switch kit looks good, though I wonder if any different than other tact
> switches one could buy locally. The immediate parts I'm after are the pots: 2
> volume pots, some others. Any suggestions for those? He seems out of the
> originals but I'd be happy with a modern equivalent. Any thoughts on those?
>
> Best ~
>
>
>
>
>
[Non-text portions of this message have been removed]