Hallo!
I just want to let you know that I added a MIDI retrofit into my
old Korg Polysix and it works fine!
I got it from the company "virtual-music" in Vienna/Austria - they
sell it over their webpage.
- no noticeable MIDI latency
- MIDI channel selectable per DIP switch on the PCB
- no solder work needed for installation
- you just need to make a hole for the midi input connector
It is a very small board that has to be installed instead of the
keyboard controller chip. The keyboard controller chip itself has to
be plugged into the empty socket on the interface pcb. A really nice
solution.
I can really recommend this interface if you need a high MIDI
performance interface or if you just don't want or can't solder in
your polysix.
If you are interested here is the link:
http://members.aon.at/virtual-music/e_index.htmYou can also see a photo of the interface on this webpage.
Ciao
Peter
http://www.ullrich.at.ttPS: No I am not the owner of "Virtual-Music"...
Just want to let you know of an effortable solution for a nice MIDI
retrofit.