Keep up the good work. I know how hard trobuleshooting is.
-Mike
--- On Thu, 10/15/09, Jed Jorgensen <jed.jorgensen@gmail.com> wrote:
From: Jed Jorgensen <jed.jorgensen@gmail.com>
Subject: Re: [PolySix] Re: Update on new run of KLM-367 PCBs
To: PolySix@yahoogroups.com
Date: Thursday, October 15, 2009, 10:50 AM
Hi all,
We are still working on this. Troubleshooting has taken a lot longer than
expected and we're still working out a few bugs. Andy has been fantastic
help in figuring out what the problems are. Once we finish that (I hesitate
to provide an estimate as to when since I've been so far off up until now)
we will get a final count and do a run of the boards.
Given the general level of interest, I'm guessing we're talking about a
fairly small production run. Somewhere between 30-50 PCBs total, unless a
bunch of people show up wanting one all of a sudden. At that scale, the cost
is likely to be a bit higher than I was hoping. We're probably looking at a
PCB somewhere in the $30 range, plus shipping.
Best regards,
Jed
On Thu, Oct 15, 2009 at 2:55 AM, del_poolp <del_poolp@hotmail.com> wrote:
>
>
> Hi,
>
> You have any news for disponibility and/or price of new runs of KLM-367 PCB
> ?
>
> Thanks,
> PooLP
>
>
> --- In PolySix@yahoogroups.com <PolySix%40yahoogroups.com>, "hyperjed"
> <jed.jorgensen@...> wrote:
> >
> > Hi all,
> >
> > A solution is coming. But like all good things, it takes time to be done
> right.
> >
> > Using the Old Crow gifs, and cross checking with the work that Radek has
> done, new Gerber files for the PCB have been created.
> >
> > Andy, myself, and my PCB designer are all checking things and building
> out a bill of materials / parts list for this new board.
> >
> > The board will be a KLM-367a drop-in replacement. It will not have any
> updates for midi. Midi is available from other commercial sources. This
> board is to get your PolySix up and running.
> >
> > Once the parts list is complete and we have finished checking the
> gerbers, we will make some prototypes of this new board for testing
> purposes.
> >
> > Assuming testing goes well, we will put out a call for all those who want
> to buy one or more PCBs. There may also be an option for complete and tested
> boards. (This is still under discussion.)
> >
> > In the meantime, please try to be patient and we work through this
> process.
> >
> > I will try to post updates as we move along so folks know where things
> are at.
> >
> > All the best,
> >
> > Jed Jorgensen
> >
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6Yahoo! Groups Links
[Non-text portions of this message have been removed]