Im no tech-pro, but i was having an unusual 'out-of-tune-voice' problem with my Chroma Polaris that 'experts' on the polaris users group said was caused by bad capacitors in the sample and hold circuits. i dont know if it has anything to do with your polysix problem, but it sounds slightly similar. the polaris would not play through a scale without sounding like the intervals were wrong. and its self tuning procedure did nothing to fix it.
----- Original Message ----
From: hjulskov <
hjulskov@yahoo.com>
To:
PolySix@yahoogroups.comSent: Tuesday, August 26, 2008 3:32:24 AM
Subject: [PolySix] Re: Suddenly out of tune -but still problems after changing PC-1 and R93
Thanks Andy!
I really appreciate your help with my beloved Polysix.
Last night I tried to switch the VCO's (SSM 2056) but no change in
which voice was distorted.
Just a summary:
∗ All voices are equally out of tune
∗ 2 voices have a "distorted" effect.. I will record and post a
sample... -however the frequency of the distortion changes during the
initial self-tuning procedure.
∗ All controlls/keys works perfectly
∗ My tests are performed in manual mode with cutoff=10 and resonance=0
Cheers,
Peter
--- In PolySix@yahoogroups .com, "Andrew Jury" <andy@...> wrote:
> we have an extra days holiday here in the UK tomorrow and I will have
> a bit more of a poke around inside. I'll let you know...
>
> Cheers,
> Andy
>
>
> --- In PolySix@yahoogroups .com, "hjulskov" <hjulskov@> wrote:
> >
> > Hi Andy
> >
> > Sorry to confuse you -all controlls works as they should. I just
> > wanted to clearify that the distortion on two of the voices wasn't
> > caused by either MG, PWM or effect.
> >
> > I'll try to swich the SSM's around to see if that changes which
> voices
> > are distorted.
> >
> > And as an additional information -I ofcause changed the battery to a
> > lithium within 24 hours after I bought it. And luckily the old
> battery
> > had not leaked yet :-)
> >
> > Have a nice weekend too :-)
> >
> > Peter
> >
> >
> > > The act of you placing your DVM probes in-circuit is changing the
> > > eletrical characteristics of it. Hence, the changes in the sound.
> Did
> > > you I hear you right? Did you just say that the MG, PWM and
> effect
> > > frequency controls aren't working either?! If so I would be
> looking
> > > for disconnected tracks on the KLM-367 as a priority!
> > >
> > > I'll get you some comparisons after the weekend.
> >
>
[Non-text portions of this message have been removed]