Here are my measurements:
5: -9.90v
6: -9.92v
7: -8.55v
Also I discovred an interresting thing -voice 3 + 5 are slightly
distorted -sounds like mg (running at a high frequency) is applied,
but frequency does not change when changing MG, PWM or effect
frequency. Also when probing pin 6 on IC17 all voices are distorted in
a similar way.
/Peter
--- In PolySix@yahoogroups.com, "Andrew Jury" <andy@...> wrote:
>
> Hi Peter,
>
> Your P6 problem is really starting to bug me! Could you take a
> voltage measurement from IC17 between pins 5, 6, and 7 and ground? It
> will be interesting to see what is going into the mux.
>