hi, been down that road before. i bought a wurlitzer from canada and
had to use a step up converter. it resulted in massive amounts of hum
unfortunately. for some strange reason the step up converters (in
finland at least) are not allowed to be grounded so i had to connect
a ground wire to the water pipes of my house! a bit tedious that was,
and grounding to water pipes on gigs is not that fun... :)
the PSU on the moog source i have is "double wired" or whatever you
call it. i have understood this is a quite common practice on mass
produced electrical devices so that the company making them don't
have to make different versions for shipping overseas. it was really
a simple procedure, i had an electrician rewire it in 20 minutes, he
just had to de-solder and re-solder two wires.
/einar
> I would be Inclined to get a step up converter rather than rewiring,
> not that you should really have to do that, though not 100% sure
>